800... 2000mm
420
max. 2470mm
590
Pillar "B"
Foldable
Beam
Pillar "A"
Wheel for
rope guidance
RUP502-T brake winch (for lifting loads)
sold separately
Concrete well
Foldable beam
Locking pin with spring
Locking pin with spring
Beam arm with 9 pcs.
adjustment holes
Locking pin
for rope secure
Additional attachment
point under the wheel
DESCRIPTION
The AT 252 anchor beam is a portable anchor point. Beam can be used on the concrete wells of diameter from 800mm to
2000mm. Device can be used for lifting loads. Winch is equipped with automatic brake for load suspension.
Device consist of:
a) Foldable beam with cast iron wheel for working rope guidance.
b) Pillar "A" with plate for winch installation.
c) Pillar "B".
Brake winch RUP502-T (for lifting loads) sold separately.
Device is made of powder painted steel. Each Pillar is equipped with locking pin with spring for quick beam installation.
Foldable beam for easier transport consist of centrally installed wheel for working rope guidance and two arms with 9 pcs. of
locking holes for proper adjustment to the well. The beam in the working position is protected against accidental closing with
locking pins with spring. Attachment point under the wheel can be used for attaching additional equipment.
PARAMETERS
Working Load Limit (WLL): 500kg
•
Ability to install RUP502-T brake winch
•
Powder painted steel construction
•
Weight: ~24kg (without winch)
•
Shipping dimensions: 115x55x65cm
•
INSTRUCTION MANUAL
edition: 2/20.02.2015 en
READ CAREFULLY BEFORE
USE THE EQUIPMENT
ANCHOR BEAM FOR CONCRETE WELLS
EQUIPMENT FOR LIFTING LOADS
Reference
number:
AT 252
1/7
