User Manual
Congratulations on your purchase of the Propeaq
Light Glasses
This manual will help you using the Propeaq light glasses. You can
operate the light glasses manually.
To beat winter blues, wear the glasses for 30 minutes in the morning
immediately after getting up with blue lights on. For an energy boost,
wear the glasses for 30 minutes during the day, but not after 8 p.m. A
detailed instruction to prevent jet lag or to avoid fatigue during
nightshift, consult the free Propeaq app.
Contents of the package
The Propeaq light glasses 1.0 B are supplied in a complete package with
a USB cable, microfibre case and cleaning cloth, light blue lenses, orange
lenses and stylish frame with integrated LEDs.
On the inside of the frame of the glasses you
will find the on/off button, the battery
indicator light and the micro-USB port.
Propeaq light glasses
Model 1.0 B
On/ Off switch
Using the glasses
Use the blue-light glasses if you have been prescribed blue light of the
Propeaq light glasses 1.0 B. If you wish, you can also use the light glasses
without lenses in the frame.
You use the orange lenses when the blue part of daylight or ambient
light needs to be blocked / filtered. The blue light must be switched off
when the orange glasses are used.
The lenses are removable and equipped with UV protection.
Before use
Before using the Propeaq light glasses 1.0 B, charge the battery first.
1. Insert the micro USB cable into the device.
2. Connect the other end, the USB, directly to a PC or an adapter and
connect it to the power supply.
3. Charge the glasses until the battery indicator (next to the on/off
button) indicates that the battery is fully charged. If the battery is
completely discharged, charging takes approximately 2 hours.
Thereafter, the period of use is approx. 2 hours; it may be somewhat
shorter at the beginning.
Battery
To maximize battery life, we recommend turning off the Propeaq light
glasses 1.0 B when not in use. Extremely cold temperatures can affect
the duration of the battery negatively. To maximize battery capacity in
cold weather conditions, the glasses should be stored in a warm place
(room temperature) or be put in a warm place before use.
Use of the Propeaq app
1. Download the Propeaq app from the App Store (iOS) or Google Play
(Android)
2. Follow the steps in the app, starting with step 1
You can download the Propeaq app from the Apple store or the Google
Play store.
After downloading, add your personal information according to the app
screens to determine your chrono type.
Make sure the information is correct. The app uses this data for
calculations in order to generate a personal user schedule.
To use the app, we also refer you to the Propeaq support page:
www.propeaq.com/support
Manual operation
The table gives an overview of the use of the Propeaq light glasses 1.0 B.
After 30 minutes, the light glasses turn off by themselves.
Warning
•
Do not use the Propeaq light glasses 1.0 B longer than intended. In
most cases, that is 30 minutes.
•
Do not use the Propeaq light glasses 1.0 B in traffic or in other
conditions that require good visibility.
•
The Propeaq light glasses 1.0 B must not be used in a damp or wet
environment.
Function
Action
Result
Turn on
the light
Press the on/off
button for 1 second
The blue light comes on
Switch off
the light
1 x briefly press the
on/offbutton
The blue light goes off, the
glasses are turned off
Battery
check
Press the on/off
button for 2 seconds
The battery indicator lights
Illuminate for a few seconds
(when the device is charged)
Disclaimer
The information in this document is subject to change without notice and does not represent
any obligation on the part of the seller. Not a single one guarantee or account, explicit or
implicit, is made regarding quality, accuracy or suitability for a specific purpose of this
document. All liability of whatever nature that ensues the use of this product is excluded.
Under no circumstances is the manufacturer liable for direct, indirect, special, incidental or
consequential damages arising from the use or inability to use this product or
documentation, even if advised about the possibility of such damage. The content of this
document is copyrighted. All rights are reserved. No part of this manual may be multiplied or
transferred, in which way and for which purposes, without explicit written permission.
Product names that are in this document are for identification purposes only. All trademarks
and product names that appear in this document are the registered property of their
respective owners.
To change the lenses, push the lens from the outside to the inside on the
side off the glasses. See figure 1. Place your thumb on the outside of the
lens and push the lens out of the frame. To place a new lens, place the
nose side of the lens on the inside of the nose bridge and press the lens
into the frame until you hear a click. This requires some force the first
few times. The lenses and the frame cannot be damaged
by these acts. Hold the frame and
your thumbs as indicated on
image 2.
Image 1
Image 2
