background image

Pro

Ma r i ne r

®

Series

Owner's Manual and Installation Guide

Professional Mariner, LLC
200 International Drive, STE 195
Portsmouth, New Hampshire 03801
TEL: 603-433-4440
FAX: 603-433-4442
www.promariner.com

Pro

Ma r i ne r

®

IMPORTANT NOTICE

This manual contains important safety and operating instructions for ProTech-i Models: 1210i, 1215i,
1220i, 1225i, 1230iPlus, 1240iPlus and 2420iPlus. Please save and read all safety, operating, and
installation instructions before installing or applying AC power to your ProTech-i Series Battery Charger.

Models  

             Part No.        Amperage              No. of Banks            Volts

ProTech1210i

             63310            10 Amps                   2 Banks                     12

ProTech1215i                    63315            15 Amps                   3 Banks                     12
ProTech1220i                    63320            20 Amps                   3 Banks                     12
ProTech1225i                    63325            25 Amps                   3 Banks                     12
ProTech1230iPLUS          63331            30 Amps                   3 Banks                     12
ProTech1240iPLUS          63341            40 Amps                   3 Banks                     12
ProTech2420iPLUS          63420            20 Amps                   3 Banks                     24

UL 03/07 B

specifications subject to change without notice

Visit ProMariner Online at www.promariner.com, for a Complete
Selection of Quality Marine Products...

Here are just a few:

Visit frequently, we are always adding new products for your
boating enjoyment!

ProMite Series - Recreational Grade Waterproof Marine Battery Chargers

ProSport Series - Heavy Duty Recreational Grade Waterproof
Marine Battery Chargers

ProTournament Series - Professional Grade Tournament
Waterproof Marine Battery Chargers

ProNautic C

3

 Series All Digital Dry Mount Battery Chargers

Digital Mobile Charge In-Transit Chargers

Battery Maintainers

AC Plug Holders

Battery Isolators

Isolation Transformers

Galvanic Isolators and Monitored Systems

Corrosion Control Products

Waterproof Marine Binoculars

Gold Plated Fuses and Holders

A Complete Line of Hand Held Test Meters

Online Technical Support and Service Support

Model Number:                                        Serial Number:                                          Date of Purchase:

PLEASE RECORD YOUR:

Advanced Electronic Fully Automatic, 4-Stage On-Board Battery Charger

Please call our Customer Care Department at 800-824-0524 from 8:30 am to 5 pm Eastern Time
for any warranty, service or installation assistance. Thank you - ProMariner Customer Care

Your Satisfaction is Important to Us!

Do not return this product to retailer or dealer for any service or warranty requirements.

Pro

Tech

i

Automatic Marine Battery Charger

LIMITE

D LI F ET IME REPAIR

TWO

 

YEAR

WARRANTY

Certified To: UL 1236 SB
c UL To: CSA C22.2 No. 107.2-01
Ignition Protected

Designed and Constructed to:

ABYC A-31
FCC Class B

Serial number is located inside the ProTech-i Charger. To view, simply unscrew and slide off the top cover of the DC Power end cap.

Summary of Contents for ProTech1210i











Reviews: