Wireless camera
(1) 10-foot charging cable
(1) power adapter
Check out our setup videos
On your computer, go to
ProjectNursery.com/Electronics or
scan the QR code here.
Unpack
1
Pair the camera with your monitor(s)
2
Before you start pairing the monitors with your camera, bring
the camera into the same room so that you have it handy. You
can put it in the baby’s room once you’ve finished pairing.
1
Plug one end of the charging cable
into the
DC In
jack on the back of
the camera.
Plug the other end into the single
charging adapter. Then plug the
adapter into an outlet or surge
protector.
The camera turns on automatically
when it’s plugged in (the indicator
light on the base below the camera
lens turns blue).
2
3
Make sure the monitor you want to pair this camera with is
turned on. If it isn’t press its POWER button to turn it on.
Use the arrows to
highlight
CAMERAS
.
Press
OK/ZOOM
to select
it. The Cameras menu
appears on screen.
Press the
MENU
button
on the monitor. The menu
appears on screen.
12:00AM
4
5
Accessory Camera
Quick Start Guide
Continues on back...
PNMC01 QSG 01
