A Picture to
Remember
Setup Instructions
INSTALLATION INSTRUCTIONS
Carefully
remove and unwrap all the
contents of box. Referring to the parts
list, make sure you have everything
needed to proceed with the installation
of the lens. If any parts are missing,
contact Prismasonic immediately.
Inspect the lens to make sure there are
no shipping defects. If you notice a
problem with the lens itself, or the lens’
mechanical system, contact Prismasonic
immediately.
Parts list:
Lens Unit
Table Stand
L-Wrench, 3 mm
L-Wrench, 4 mm
Instruction Manual
Anamorphic Lens
H-850M
Bringing the lens into the use:
STEP 1
Lift the lens up and flip it upside down
in a
stand.
By using the
L-wrench, 3 mm
carefully
remove the
bottom plate
of housing by
releasing the four screws on the bottom plate
(Fig 1)
.
STEP 2
Now carefully take off the plastic cover sheets
from both sides of both lenses
(Fig 2).
Fig 1
Fig 2
Fig 3
STEP 3
Insert the bottom plate back to the housing and
prepare to affix the four screws
(Fig 3
) with
L-
wrench, 3mm.
Tighten the screws securely.
Flip the lens back upright in a stand.
Your lens is
now ready for the setting up!
Anamorphic Lens
H-850M
