background image

N

H

W

X

J

FF

AA

DD

BB

D

Z

V

Y

Y

U

• Always Wear a Safety Harness with this Product

• Practice Using at Ground Level

• Weight Limit: 300 lbs.

• Tree Size: 9”-18” diameter 

Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO  80120

2019

©2019 (rev. 1/19)

Mac Daddy 22’ Xtra Wide

Deluxe Ladderstand

MODEL: PVLS-601

Instruction and Safety Manual

Every year serious injury or death can occur from hunting related accidents. 

To ensure your safety, please c

ompletely 

read and follow this safety manual 

and a

ll w

arning labels b

efore 

assembling, installing or utilizing this product. 

Do not use this product before fully understanding all safety warnings and instructions. If you have questions, are unsure about any information or need additional 

information concerning your product, contact our customer service department at 1-866-972-6168 or visit w

ww.Primaltreestands.Com.

  Keep and

maintain this safety and instruction manual in a safe location for future reference.  

W A R N I N G

SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT

Summary of Contents for Mac Daddy PVLS-601





















Reviews: