Symptom
Possible Cause / Remedy
Unit not functioning
when used with USB
receiver.
Unit works erratically
or intermittently.
• Batteries flat - replace.
• Out of range - move S
END-6
closer to receiver.
• Interference- place both S
END-6
and receiver unit
away from sources of interference.
Units will not Pair- LED
is extinguished after 30
seconds.
• Batteries flat - replace.
• Ensure S
END-6
is close to receiver
(e.g. 1 metre/ 1 yard) while pairing.
INSTRUCTIONS
SimplyWorks
®
Pack Contents
Carefully check the contents
of the box, which are:
SEND-6
This manual
SEND-6
Your
SEND-6
is warranted against defects in manufacture or component failure. The unit is designed for
domestic and educational applications. Use outside these areas will invalidate the warranty.
Unauthorised repair or modification, mechanical abuse, immersion in any liquid or connection to
incompatible equipment will also invalidate the warranty.
If your
SEND-6
does not operate correctly, please use the following guide to determine the cause. If, after
following this guide, your unit still does not operate, please contact your supplier before returning it.
Troubleshooting
Warranty
Unit not functioning
when used with
stand-alone receiver.
• Units are not Paired - follow procedure
in Pairing section.
• Batteries flat - replace.
• Units are not Paired - follow procedure
in Pairing section.
• Batteries flat - replace
SimplyWorks is the world’s first fully integrated
wireless system specifically for users with motor
skills difficulties.
SimplyWorks allows you the freedom to create
wire-free,
single
or
multi-user
learning
environments, reducing set up time and allowing you
to concentrate on the learning tasks themselves.
SEND-6
may be used with any of the SimplyWorks
receivers to give mulitple switch access using any
of the various switches that are available, provided
they are fitted with a standard 3.5mm jack plug.
SEND-6
is simple to operate but to ensure you get
the most from your purchase, please take time to
read this instruction booklet.
Product Description
Features
• Mouse emulator functions
• 10 metre (32’) operating range.
• Integrated LED display to allow switch function
to be selected when used for computer access.
• Automatic power saving mode- no on/off switch.
• Long battery life.
• Works with any
SimplyWorks
®
receiver for
computer or stand-alone switch access.
• Six 3.5mm jack socket inputs from
any switches
• Identical functions to SimplyWorks
SWITCH 125 with the addition of mouse
emulator functions’
Unit 37 Corringham Road Industrial Estate
Gainsborough Lincolnshire DN21 1QB United Kingdom
Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992
www.pretorianuk.com
SimplyWorks® is a registered trademark of Pretorian Technologies Ltd.
S040011:1
1
2
3
4
5
6
The function of a switch paired with a stand-alone
receiver is implicit and does not need to be programmed.
All six channels of
SEND-6
will operate the receiver,
irrespective of their function settings. This allows a
number of co-operative exercises to be devised.
Operating with Toy Controllers and other stand-alone Receivers
Your
SEND-6
has no user serviceable parts. If repair is
necessary the unit should be returned to Pretorian
Technologies or an authorised Distributor.
Maintenance
1
2
3
4
5
6
F
G
D
E
A B C
