background image

Instructions for use for Preising full body harnesses type tested 
according to EN 361 series PASA

These instructions for use have been created and are valid for English speaking countries. Any person 
who forwards this Preising product to another country or to another person is responsible for forwarding 
these instructions for use in the respective language. This person shall be liable for any damages 
arising from noncompliance with this legal obligation. Preising can supply the instructions for use only in 
the relative language of a country that the client has used for the order (language of the order = 
language of the instructions for use).

General Information

Any user shall use the full body harness that has been adjusted to his/her personal measures. This full 
body harness shall be assigned to him/her personally.
It is very important to put on the full body harness correctly, therefore, read these instructions for use 
very carefully before using your full body harness.
The proper and designated use of the full body harness is very important, therefore, read these 
instructions for use carefully before using your full body harness.
In compliance with any legal and other official rules and regulations, before using the equipment it must 
be ensured that the user is physically suitable and has received instructions on all relevant safety rules 
and regulations with regard to the use of personal protective equipment against falls from a height. The 
user must wear protective clothing suitable and appropriate for the work.

The series PASA I (1), PASA III (3) and PASA V (5) are equipped only with shoulder straps and leg 
straps with integrated fall arrest attachment element on the back and/or front.

PASA I (1) PASA V (5) PASA 51 PASA II (2) PASA X (10)
The series PASA II (2), PASA IV (4), PASA X (10), PASA 51 are furthermore equipped with a waist belt 
with integrated attachment elements for work positioning or restraint (=work positioning harness), 
optional attachment element for guided type fall arrester and D-rings to attach belt pouches (not for 
PASA IV(4) for the transportation of material.

Summary of Contents for PASA I Series











Reviews: