Tel. +32-3-451 05 00
E-mail:
Fax +32-3-451 05 01
Website: www.PowerClimber.be
This document and all copies are the property of Power Climber BVBA. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
Reference:
38740-E
Issue date: 24-Aug-2015
Revision: D
Page 1 of 16
Models: Single phase: TITAN 501 and TITAN 651 hoist with Central Control box
Three phase: TITAN 503 and TITAN 653 hoist with Central Control box
Conform to EN 1808 (1999) and
Machine Directive 98/37 EC
WARNING:
All persons operating this equipment must read and completely understand this
manual.
All persons must be thoroughly trained in the use of the equipment, it’s operational
and safety features, and they must also be capable of carrying out the daily
checklist.
Only authorized and physically fit persons shall operate the equipment.
Any operation in violation of these instructions is at the operator’s own risk and
may result in serious injuries.
Keep this manual with the hoist at all times.
Only use spare parts and steel wire rope from POWER CLIMBER,
It is not allowed to put the machinery into service until the machinery into which it
is incorporated or of which it is to be a component, has been found and declared
to be in conformity with the provisions of Directive 98/37/EC and with national
implementing regulation.
On platforms with only ONE hoist on ONE walk-through stirrup, an Overspeed
safety device is compulsory, in addition to the standard slack rope safety device.
Manufacturer: Power Climber b.v.b.a, Satenrozen 7, B-2550 Kontich BELGIUM
OPERATING
INSTRUCTIONS
HOIST
