background image

SUMMER WAVES

®

SALT WATER SYSTEM

FOR ABOVE GROUND SWIMMING POOLS

 P5E000400000 models

Polygroup

®

 Limited (Macao Commercial Offshore), (hereinafter “Polygroup

®

”) warrants to the original purchaser only, the Salt Water System against defects in material 

and workmanship for 180 days from the date of purchase. Original Purchaser must retain proof of such purchase in the form of an original store sales receipt 

and must produce such upon request by Polygroup

®

 or its designated agents. Warranty claims cannot be processed without a valid proof of purchase.

This Limited Warranty applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in 

Polygroup

®

’s sole discretion. Consequential damages, including claims for loss of water, pool chemicals, damage, or labor are not covered under this Limited 

Warranty.

This Warranty will be declared invalid should the Purchaser modify or repair the product themselves or by unauthorized persons; use non-Polygroup

®

 parts or 

accessories with the product; use the product in contravention of the manufacturer’s Instructions; use improper voltage; abuse the product in any way; or through 

accident or negligence. Normal wear-and-tear is not covered under this Warranty, nor are acts of God outside the control of Polygroup

®

.

IN NO EVENT SHALL Polygroup

®

, THEIR AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER 

PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or others jurisdictions do not allow the exclusion or limitation of incidental or 

consequential damages, so the above limitation or exclusion may not apply to you.

LIMITED WARRANTY

DO NOT RETURN PRODUCT TO STORE

For any set up and troubleshooting issues, please visit  

https://polygroup.zendesk.com/hc/en-us  Customer Service: (888)919-0070  

To order parts and accessories,

please visit www.polygroupstore.com

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

OWNER’S MANUAL

DISTRIBUTED BY: Polygroup

®

 LIMITED (MACAO COMMERCIAL OFFSHORE)

Unit J, 10

th

 Floor, Macau Square, Av do Infante D.Henrique, No.43-53A, Macau

Should you encounter a problem with your Polygroup

®

 Product, please DO NOT return the product to the place of purchase. All Warranty claims must be made directly

to Polygroup

®

. Prior to contacting Customer Service, please first review the Troubleshooting Guide in the Installation Manual, or review the FAQ at www.Polygroup.com.

Please review setup instruction videos on www.Polygroup.com/video. If you are still unable to correct the problem, please contact Polygroup

®

 Customer Service at (888)

919-0070. Have the product type and your purchase receipt ready. Our Customer Service Representative will assist you in resolving the problem. You may be asked

to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup

®

 without a Return Authorization number.

09C3A40USA27

Summary of Contents for SUMMER WAVES P5E000400000













































Reviews: