background image

EASY-READ DIGITAL KITCHEN SCALE

ITEM#: KSC-310-28

USE & CARE INSTRUCTIONS

IMPORTANT:  RETAIN FOR FUTURE REFERENCE, READ CAREFULLY.

 

For assistance with use, parts and customer service call (800) 431.2133 Monday through Friday, 9AM to 5PM EST,

email [email protected] or visit our website at www.polder.com.

Customers in the UK can call +44 (0) 1243 780501 or visit www.polderproducts.co.uk

IMPORTANT INFORMATION:

If this is your first time using the Easy-Read Digital Kitchen Scale please be sure to remove the protective insulation tape from the battery compartment and protective sheet 

from the weighing platform before use.

LOW BATTERY INDICATOR

1.  If the battery symbol             appears on the display, it is recommended to replace with new batteries to ensure optimum accuracy of the scale.

2.  If the display shows ‘Lo’ and shuts off automatically, please replace the batteries immediately.

TO INSTALL / CHANGE BATTERIES

Warning:  batteries may pose a choking hazard.  Do not let children handle batteries.

This item uses four AAA batteries.  In order to ensure proper performance, be sure to replace batteries as a simultaneous set.  Batteries should be removed from the scale if 
consumed or if the product is to be left unused for a duration of time.  It is recommended to clean all battery contacts prior to installation.  Do not mix old and new batteries.  
Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
Always purchase the correct size and grade of battery most suitable for the intended use.

Replace all batteries of a set at the same time.

Ensure all batteries are installed correctly with regard to polarity (+ and -).

Remove used batteries promptly.
1. Battery door is located on the back of the unit.

2. Press and pull open the battery cover.

3. Insert four AAA size batteries as shown:

4. Replace battery door, pushing down until it snaps in place.

DISPOSAL OF USED BATTERIES

Batteries may contain hazardous substances which could endanger the environment and human health.

 

This symbol marked on the battery and/or packaging indicates that used battery shall not be treated as municipal waste.  Instead it shall be left at the appropriate 

collection point for recycling.  By ensuring the used batteries are disposed of correctly, you will help prevent potential negative consequences for the environment and 

human health.  The recycling of materials will help conserve natural resources.

For more information about collection and recycling of used batteries, please contact your local municipality, your waste disposal service or the point of sale where you 

purchased this product.

TO TURN THE SCALE ON/OFF:

Place item on a flat surface before use. 
1. Press the (ON/OFF) button to turn scale ON.  “HI” will display and after a few seconds a “0” (for g) or “ 0.0” (for lb & oz) will appear.

The scale is ready to use.
2. Press the (ON/OFF) button to turn scale OFF.

NOTE:  The backlit display will turn off after 30-seconds without use, however the scale is still on and functioning.  Tap the weighing surface to re-illuminate display.  The 

auto shut-off feature will turn the scale off if not used for 3 minutes.

TO SWITCH BETWEEN lb AND g:

HOW TO USE TARE (additive weighing) FEATURE:

When using the TARE function, starting weight should not exceed 2.10 lb. / 950 g. 

1. Place first item on scale, scale will display weight of item.
2. Press (TARE) button.  Display will revert to “0” (for g) or “0:0.0” (for lb. and oz.).
3. Place second item on scale, scale will display weight of item.
4. Press (TARE) button.  Display will revert to “0” (for g) or “0:0.0” (for lb. and oz.).
5. Repeat steps 3 and 4 until all items have been weighed.
NOTE:  there are two ways to set the scale at “0” when weighing items in a container.

1. Place the container on the scale before turning it ON.
2. If the scale is already ON, place the container on the scale and press the (TARE) button which will revert the scale to “0” (for g) or “0:0.0” (for lb. and oz.).

NOTE: the scale will read “O-Ld” if weight on scale is above the scale‘s capacity of 11.0 lb. / 5,000 g.

ON

OFF

x2

With the scale off, turn on the scale and immediately tap the (ON/OFF) button again while the display reads “HI”.  It’s important to note that this is a gentle double 
tap to switch between pounds and grams.  No need to press.  If there is too much of a delay between turning the scale on and tapping again, the scale will not 
switch between reading modes.  Turn the scale off and try again. 

CAPACITY: 11.0 lb. / 5,000 g. (displays in 0.1 oz. / 1.00 gram increments).

Summary of Contents for KSC-310-28

Page 1: ...d it shall be left at the appropriate collection point for recycling By ensuring the used batteries are disposed of correctly you will help prevent potential negative consequences for the environment and human health The recycling of materials will help conserve natural resources For more information about collection and recycling of used batteries please contact your local municipality your waste...

Page 2: ...ne Le symbole inscrit sur la pile et ou son emballage indique qu on ne doit pas traiter la pile usée comme un déchet domestique à recueillir par la municipalité Elle doit plutôt être laissée à un point de cueillette désigné pour le recyclage En vous assurant que les piles usées sont bien recyclées vous aiderez à prévenir les conséquences négatives pour l environnement et la santé humaine Le recycl...

Page 3: ...g ou à 0 0 0 pour lb et once 5 Répétez les étapes 3 et 4 jusqu à ce que tous les articles aient été pesés NOTA il existe deux façons de ramener la balance à 0 lorsqu on pèse des articles dans un contenant 1 Placez le contenant sur la balance avant de l allumer ON 2 La balance étant déjà allumée placez le contenant sur la balance et appuyez sur le bouton TARE qui ramènera la balance à 0 pour g ou 0...

Page 4: ... báscula a 0 cuando se pesan los artículos en un recipiente 1 Coloque el recipiente en la balanza antes de activarla ON 2 Si la balanza ya está activada ON coloque el recipiente en la ella y oprima el botón TARE la pantalla cambiará para mostrar 0 para gramos o 0 0 0 para libras y onzas NOTA la balanza leerá 0 Ld si el peso en la balanza es mayor que la capacidad de la balanza de 11 libras 5000 gr...

Reviews: