Attach mount to ceiling
Attach pole
1
2
Ÿ
Read these instructions carefully before installing your equipment..
Ÿ
Install the mount in a suitable location using fixings which are appropriate for the ceiling material and
structure. Consult a qualified builder if you are in any doubt as to the structural integrity of the ceiling.
Ÿ
Do not attempt to alter or modify any part of the ceiling mount or it's attachments.
Ÿ
Do not use if any parts are broken or appear to be damaged.
Ÿ
Tighten all bolts and fixings securely. Only use fixings provided with this bracket.
Ÿ
Do not mount your projector near to sources of heat or moisture.
Ÿ
Always have a minimum of two persons to install the projector onto the mount.
MOUNTING INSTRUCTIONS FOR
PROJECTOR CEILING MOUNT
MODEL No.
PMVMOUNT5
SV-PM0002
Max Weight Loading 50Kgs
Projector Fixing Kit
Mount Assembly Kit
NOTE:
Ÿ
If in any doubt of the suitability of the
ceiling, it's construction or what type of
fixings to use, consult a qualified builder or
installer.
NOTE:
Ÿ
Do not over-tighten bolt 'A' shown in Stage 2b above.
Ÿ
When inserting Grub Screws 'F' as shown in Stage 2c above, insert finger-
tight so all screws are at an equal depth against inner pole. Then tighten
with allen key. Do not over-tighten these Grub Screws.
Ceiling plate
assembly
Projector
mounting plate
Tilt / Swivel
Assembly
1m Pole
G
- M3 x 10mm
I
- M4 x 10mm
K
- M5 x 10mm
M
- M6 x 10mm
O
- M3 Washer
Q
- M4 Washer
H
- M3 x 25mm
J
- M4 x 25mm
L
- M5 x 25mm
N
- M6 x 25mm
P
- M5 Washer
R
- M6 Washer
A
- M8 x 75mm Bolt
B
- M8 Nut
C
- M8 washer
D
- M6 x 12mm Bolt
E
- M6 washer
F
- M6 Grub Screw
S
- M5 x 10mm
T
- M5 x 5mm
U
- M6 x 15mm
Also Required
x2
x2
x4
x2
x2
x8
x4
x4
x4
a
b
c
A
B
F
C
x4
