![background image](http://html.mh-extra.com/html/pmv-mounts/pmvmount7/pmvmount7_mounting-instructions_1569631001.webp)
Projector Fixing Kit
Projector Mount assembly parts
Projector Mount assembly kit
I-
Spacer
x20
J
-
of each
Struts
Short,
Medium,
Long
x2
H
-
Washer
M3,
M4,
M5,
M6
x4
x4
x4
x4
G
-
Screw
M3 x 25mm
M4 x 25mm
M5 x 25mm
M6 x 25mm
x4
x4
x4
x4
F
-
Screw
M3 x 10mm
M4 x 10mm
M5 x 10mm
M6 x 10mm
x4
x4
x4
x4
Pre-assembled pole section
Ceiling mount
Projector mount
pmv
mounts
.co.uk
Ÿ
Read these instructions carefully before installing your equipment.
Ÿ
Install the mount in a suitable location using fixings which are appropriate for
the ceiling material and structure. Consult a qualified builder if you’re in any doubt as
to the structural integrity of the ceiling.
Ÿ
Do not attempt to alter or modify any part of the ceiling mount or its attachments.
Ÿ
Do not use if any parts are broken or appear to be damaged.
Ÿ
Tighten all bolts and fixings securely. Only use fixings provided with this bracket.
Ÿ
Do not mount your projector close to sources or heat or moisture.
Ÿ
Always have a minimum of two persons to install the projector on to the mount.
Mounting instructions for Professional extendable projector mount
Fits to flat ceiling
Maximum projector fixing points up to 630mm x 325mm - Up to 25Kgs
Model No.
PMVMOUNT7
Factory No.
Z0874FIX1M
E
-
Button head screw
M6 x 8mm
x4
C
-
Washer
M8
x1
D
-
Grub screw
M6 x 8mm
x4
A
-
Button head bolt
M8 x 75mm
x1
B
-
Nut
M8
x1
Attach pole
2
NOTE:
Ÿ
Do not over-tighten bolt 'A' shown in Stage 2b above.
Ÿ
When inserting Grub Screws 'F' as shown in Stage 2c above, insert finger-tight so all
screws are at an equal depth against inner pole. Then tighten with allen key. Do not over-
tighten these Grub Screws.
a
b
c
A
B
D
C
x4
Attach mount to ceiling
1
NOTE:
Ÿ
If in any doubt of the suitability of the
ceiling, it's construction or what type of
fixings to use, consult a qualified builder or
installer.