Item #: 53563 Name: Solar Flower Spinner
USE AND CARE INSTRUCTIONS
Please read these instructions and keep them for future reference
Setup time approximately 20 minutes
© 201 Made in China exclusively for Plow & Hearth, Madison, VA 22727 plowandhearth.com 800-494-7544
7
Step 1:Slide one Spinner(B) onto end of the
T-bar(A), with the solar panel facing out.
Add Tubular Spacer(D) and thread on Nut(E),
Then tighten Nut with Wrench(L). Add Flat
Spacer(F) and Lock Washer (N),thread on Cap
Nut(G),and tighten with Wrench.
Slide second Spinner(C) onto other the end of
the T-bar(A), with the solar panel facing out.
Add Tubular Spacer(D), thread on Nut(E),
tighten with Wrench, add Flat Spacer(F)
and Lock Washer(N),thread on Cap Nut(G),
and tighten with Wrench.
Step 2:To assemble the
pole, slide Double Prong(I)
onto the Ground
Stake(H) and thread
on Extension(J).Align
holes on Extension and
Ground Stake and
install 2 Screws(M).
Next, thread on Spinner
Mount(K) onto Extension(J).
Align holes on Extension and
Spinner Mount and install
2 Screw(M).
Tool required
for pole
assembly:
Phillips Head
Screwdriver
Step 3:Choose appropriate place for your spinner.Push assembled
pole and ground Stake in ground,keeping pole straight.Place
assembled spinner from Step 1 onto Spinner Mount and enjoy.
NOTE: If you are expecting unusually
strong, sustained winds, take down
the spinner head to prevent damage
Before use, remove the solar panel'sprotective clear plastic film.
