VERIFY THE CONTENTS INSIDE THE BOX
The package should contain the following items plus Full HD Outdoor IR Wireless IP Camera. If any item
is missing or damaged, please contact the seller immediately
Quick Installation Guide x 1
User’s Manual CD-ROM x 1
Power Adapter x 1
Screw Package x 1
Rubber Cover x 1
Antenna x 1
Female to Female RJ45 Connector x 1
Step 1: Hardware Overview
I / O
DC 12V
AUDIO OUT (Green)
AUDIO IN (Pink)
ETHERNET RJ45
TV VIDEO OUT
Interface
Description
I/O
I/O terminal connector is used for such functions as motion detection, event
triggering, and alarm alert. It provides the interface to I/O terminal.
1) GND (Ground): Initial status is LOW
2) DI (Digital Input): Max. 50mA, 5V DC
3) DO (Digital Output): 5V DC
Input Power
12V DC.
Audio Out (Green)
Connect a loud speaker to the network camera. This is for voice alert and
two-way audio.
Audio in (Pink)
Connect a microphone to the network camera.
Ethernet RJ45
Connect to PC or hub/switch.
For connecting to 10BASE-T Ethernet or 100BASE-TX Fast Ethernet
cable, this Ethernet port built N-Way protocol can detect or negotiate the
transmission speed of the network automatically. Please use CAT-5 cable to
connect the Network Camera to a 100Mbps Fast Ethernet network switch or
hub.
TV Video Out
Connect BNC connector to a TV.
Step 2: Installation
1. You can use 3-axis bracket to adjust the angle of camera. Please lock the screws tightly to fix the
angle after adjusting.
ROTATION: 360˚
TILT: 180˚
PAN: 360˚
Note
Please take note of the cable situation. Avoid excessive distortions in the cable;
otherwise, it will cause malfunction.
2. Installing the antenna:
a. Plug the Antenna into the connector. Turn the lock nut to the right until it is totally locked.
Do not bend or try to straighten the antenna bar.
