PJLink IN5132 Network Manual Download

Page: 1 / 66

Projector

IN5132/IN5142/IN5134/IN5134a/

IN5144/IN5144a/IN5135/IN5145

User's Manual (detailed)

Network Guide

Thank you for purchasing this product.

This manual only explains the network function of this product. For proper use of

this product, refer to this manual and the other manuals for this product.

Features

This projector has a network function that provides you with these features:

►Before using this product, be sure to read all manuals for this

product. After reading them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

Network Presentation

: allows the projector to project computer images transmitted

through a network. (

)

Web Control

: allows you to monitor and control the projector through a network from a

computer. (

)

My Image

: allows the projector to store up to four still images and project them. (

)

Messenger

: allows the projector to display text sent from a computer through a network.

(

)

Network Bridge

: allows you to control an external device through the projector from a

computer. (

)

• Microsoft

, Internet Explorer

, Windows

, Windows Vista

and Aero

are registered trademarks

of Microsoft Corporation in the U.S. and/or other countries.

• Adobe

and Flash

are registered trademarks of Adobe Systems Incorporated.

• Pentium

is a registered trademark of Intel Corporation.

• JavaScript

is a registered trademark of Sun Microsystems, Inc.

• HDMI

, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• Crestron

, Crestron e-Control

, e-Control

, Crestron RoomView

and RoomView

are

trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other

countries.

• Trademark PJLink is a trademark applied for trademark rights in Japan,

the United States of America and other countries and areas.

All other trademarks are the properties of their respective owners.

009-1417-01

Summary of Contents for IN5132



































































Search results

Summary of Contents for IN5132

Reviews:

Related manuals for IN5132

Brands by name

Popular brands

PJLink IN5132, Network Manual

Search results

Summary of Contents for IN5132

Reviews:

Related manuals for IN5132

Brands by name

Popular brands