![background image](http://html1.mh-extra.com/html/phonic-ear/fts01/fts01_quick-start-installation-manual_1552945001.webp)
Quick star t installation guide for an induction loop
please refer to product user guide for complete user instructions
system components
1
Package may vary depending on product and model
installation tools
2
Gather these tools before you begin installation
power
transformer
© 2005 Phonic Ear Inc. Phonic Ear and the names of Phonic Ear products are trademarks or registered trademarks of Phonic Ear Inc. in the U.S. and other countries.
921-34-210-00 Rev. C 1005
Interna45 3917 7101
Amplifier
teleloop cable
teleloop
cable clips
staple gun
T-25 staples
needle nose
pliers
flathead
screwdriver
jeweler’s flathead
screwdriver
wire strippers
Pull up a section of the carpet along the
baseboard with the needlenose pliers
3
Insert a flathead screwdriver to lift
the carpet away from the baseboard
4
5
Pull the fishtape up and double knot the
teleloop cable through the open slot
6
Now pull the attached teleloop cable
back under the carpet to the other side
7
Untie the knotted teleloop cable
from the fishtape
8
Stretch the cable along the baseboard
and tuck it in with the screwdriver
9
Tack in the cable clips or use a staple
gun to secure points along the way
10
Around doorways without carpet, staple
the cable at the bottom and pull taut
11
Guide the fishtape under the carpet
toward the other side of the room
Continued on the back side
fish tape
(not essential)