Installation Instruction
Philips Lighting India Limited
Installation
Type
:
Light Source
:
LED’s
Voltage
:
240 V, 50 Hz
IP Classification
:
IP-65
Net Weight
:
0.8 kg
Max. Projected Area :
.03 m²
Application
:
Outdoor use only
Mounting position
:
Horizontal
Application height
:
Upto 6m
Pole Outer Diameter :
32-40mm
BRP042
Brp 042
Street Lighting Luminaire
Dimensions
1. Connect the red wire to live, Black wire to Neutral and the Green-yellow wire to
ground. After joining Properly insulate the wires using good quality Electrical
insulation tape.
2. Unfasten the Check nuts and loosen the mounting screws to the required
height as per the pole size.(Fig 1)
3. Insert the pole up to the position shown in the drawing below (Fig 2)
4. Tighten both the mounting screws with tightening torque of 4Nm and then
tighten the Check nuts fully (Fig 3).
Un-screw
Screws & Check nuts
Pole should not go
beyond this point
FIG:1
FIG:2
FIG:3
