Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
Rechargeable
shaver
HQ 4407
SAP coding HQ 4407
4322 277 006
6
9
01/10
HINTS FOR REPAIRS
a. Disassembly
-
Remove shaving unit, to prevent damages
during a repair.
-
Remove the screws A1 (4x).
-
Put the shaver on the table and remove the cover
from the shaver.
-
Pull the connection leads out of the terminals on the
bearing block of the motor and remove the p.c.-board.
-
Loosen the motor clamping springs on the bearing block
with a small screwdriver.
-
Remove the motor.
-
Remove the screws A2 (2x)
-
Unlock the peg clamping (3x) between frame and hair
chamber.
-
Remove the gearwheels and trimmer drive.
-
To remove the trimmer, fi rst disassemble the trimmer
slide by pushing down the locking pegs (4x “X” in
exploded view) and move the slide slightly outwards.
-
Make room between trimmer and cover with a small
screwdriver (“Y” in exploded view).
b. Assembly
-
The assembly must be carried out in reverse order of
what is described under a. Disassembly.
CAUTION!
WHILE CHECKING THE P.C.-BOARD REMEMBER
THAT MOST COMPONENTS AND THE MOTOR
ARE ENERGIZED BY MAINS VOLTAGE.
TECHNICAL DATA
Voltage
: 100 - 240 V 50/60Hz
Power consumption
: Motor depending
Motor voltage
: 54 V
Power supply
: SMPS
Shaving heads
: HQ4 - 4822 690 30468
Comfort control
: fi xed setting
C1
240 V
D1 D4
SK1
L1
C2
M
C4
R2
IC1
R5
L2
R1
D5
R1
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
C3
R3
4852
4853
