PRODUCT INFORMATION
Features
HI555
HI556
HI565
HI566
Pilot light
x
x
x
x
Integrated cord winder
x
x
x
x
Spray
x
x
x
x
Variable steam
x
x
x
x
Turbo steam
-
-
x
x
Shot of steam
x
x
x
x
Vertical steam
x
x
x
x
Self clean
x
x
x
x
Enght cord set 2.5 m
x
x
x
x
Anti-drip function
x
x
x
x
Automatic shut-off
-
-
x
x
Anodised soleplate
x
x
x
x
Carry case
-
x
-
x
Voltage / Frequency
: 100V, 110-127V, 220-240V
50-60Hz
Power consumption
: 100V,
1200W at 100V
110-127V,
1300W at 120V
220-240V,
1450W at 220V
Soleplate temperature
: 215
°
±
25
°
C
Steam output
: Varible steam output max. 12gr/min when :
- slide is set to position 6
- temperature dial is set to position MAX.
Turbo steam output :
Always to be used in combination with
the variable steam slide, increase the
steam output with max. 18gr/min to a total
of 30gr/min.
Shot of steam : 60gr/min.
This product meets the requirement regarding
interference suppression on radio and TV.
Steam Iron
HI555
HI556
HI565
HI566
Published by Philips Domestic Appliances and Personal Care Printed in Hong Kong
©
Copyright reserved Subject to modification
Turbo steam function :
The steam output of the variable steam function depends upon
the position of the slide knob.
When set to position 6 the steam output is 12 gr/min.
This might be not sufficient. In that case the turbo button has to
be pushed down for max 10 sec. Due to this operation the steam
output will increase to 30 gr/imn.
Vertical steam :
When the iron is kept in a vertical position, the s.o.s. button can
be used to iron hanging fabrics as curtains.
Self-clean function :
When the self-clean button is pushed down, a sudden flow of
water is released from the tank into the heated sole plate.
This thermal shock will cause scale particles come loose from
the steam chamber. These particles are then flushed out through
the steam vents by the water.
Anti-drip :
Water is only released through the tank valve into the steam
chamber if the sole plate temperature is high enough to evaporate
all water. If the temperature is not hot enough the tank valve is
closed by means of the bi-metal disc.
Auto shut-off :
A relay in the electronic module interrupts the power to the heating
element when the iron has been motionless :
- for 30 seconds in horizontal position.
- for 8 minutes in vertical position.
The red " Auto-off " pilot light starts blinking, a sound signal is
heard too.
When the iron is moved again, it's automatically switched on
again. When the iron is moved again, it’s automatically switches
on again.
N.B. When the iron is plugged in in a horizontal position, it will
not be switched off during the first 2 minutes to ensure that
it heats up properly.
Real-off function :
The movement of the thermostat's bi-metal is limited in downward
direction thus will prevent the thermostat contacts from closing
at room temperature at MIN setting.
4322 277 00258
02/00
Ver.2
Service
Service
Service
Philips Domestic Appliances and Personal Care
Service manual 4822 729 22167 is herewith cancelled
