background image

Service Manual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

 

System Iron Double Speed

GC6103

07/06

PRODUCT INFORMATION

Features
Iron

- Optinox 

soleplate

-  Steam trigger lock
-  Ready within 2 minutes
-  Stable heel rest
-  Iron light switch

Boiler

-  Steam rate (70 grams/min)
-  Boiler capacity (1 L, up to 2 hours of ironing)
-  Ready within 8 minutes
-  1.9 m cord length
-  1.7 m hose length
- Anti-slip 

rubber 

feet

- Boiler 

light 

switch

Safety Information

-  This product meets the requirements regarding 

interference suppression on radio & TV.

-  Due to the high wattage of the iron, only the specified 

cord set must be used.

-  After the product has been repaired, it should function 

properly and has to meet the safety requirements & legal 
regulations as laid down & officially established at this 
moment.

TECHNICAL INFORMATION

Voltage  

:  230 V

Frequency  

:  50 - 60 Hz

Power consumption  :  Iron 

:  800 W

  

 Boiler 

 

1250 

W

   

 

Pressure : 

2.5 

bar

Dimension (F-box)  :  412 x 276 x 332 mm
Weight : 

6.06 

Kg

Water advice 

:  Suitable for tap water use. However if 

 

  the tap water in your area is very hard, 

 

  we advise you to mix it with a equal 

 

  portion of  distilled water or to use 

 

  distilled water only.

= changed

Summary of Contents for GC6103







Reviews: