background image

1. Introduction

 
 

The Firmware Upgrade will upgrade WACS57’s firmware to 

Version 1.2.10.

 

 
__________________________________________________________________ 
 
 

2. Key features added 

 

 
 
The software release 

1.2.10

 has provided a solution for CD ejection problem that 

has happened on a marginal number of CDs.

 

 
__________________________________________________________________ 
 
 

3. Preparation 

 

i) Verifying firmware version

 

Before upgrading, check the firmware version.  
 

1.  Turn on your WAC5 Center

 

 

2. Press 

MENU

 

3. Press 

/

 to select “

Information

”. Press 

OK

 

4. Press 

/

 to select “

System

”. Press 

OK

  

The display shows the FW (firmware) version number 

  

Upgrading is necessary

 

if the FW version is an earlier one

 

 

Note:  The firmware information is also useful when you call Philips Customer 
Care Center.

 

 
 

ii) Checking Wi-Fi connection

 

Wi-Fi connection between Center and Station:

  

   -   Check you have pressed 

STANDBY-ON

 to turn on WAC5 Center and 

WAS700 Station 

-  On Station, check you can playback tracks in 

HD

 mode 

-  On Station, check the signal indication shows maximum reception 

 

Summary of Contents for CENTER-STATION WIRELESS MUSIC CENTER-STATION WACS57 - Firmware Upgrade Readme File










Reviews: