background image

• Dès que l’achat de votre appareil

Philips est enregistré, vous avez droit à
tous les avantages dont bénéficient les
possesseurs des produits Philips.

• Remplissez et renvoyez votre carte

d’enregistrement de garantie jointe à
votre appareil sans tarder et vous béné-
ficierez de ces avantages importants.

Renvoyez votre carte d’enregistrement de garantie pour vous

assurer de recevoir tous les avantages auxquels vous avez droit.

Vérification

de garantie

Enregistrez votre produit
dans les 10 jours pour
confirmer votre droit à
une protection maximum
selon les termes et les
conditions de votre
garantie Philips.

Confirmation

de possession

Votre carte d’enreg-
istrement de garantie
prouve que vous possédez
l’appareil en cas de vol ou
de perte du produit.

Enregistrement

du modèle

Renvoyez votre carte d’en-
registrement de garantie dès
aujourd’hui pour vous assur-
er de recevoir toutes les
informations, les offres et les
bonus auxquels vous avez
droit en tant que possesseur
de ce modèle.

Cet « éclair à pointe de
flèche » indique qu’un matéri-
au non isolé, situé à l’intérieur

de l’unité, risque de provoquer un choc
électrique. Pour la sécurité de chacun,
nous vous prions de ne pas retirer le
boîtier de ce produit.

Le « point d’exclamation »
attire votre attention sur des
sujets risquant de provoquer

des problèmes de fonctionnement et
d’entretien si vous ne lisez pas les infor-
mations s’y reportant.

DANGER:

NE PAS EXPOSER

CET ÉQUIPEMENT A LA PLUIE NI A
UNE HUMIDITÉ EXCESSIVE POUR
ÉVITER LES RISQUES D’INCENDIE
ET DE CHOC ÉLECTRIQUE.

ATTENTION:

Pour éviter les

chocs électriques, introduire la lame la
plus large de la fiche dans la borne
correspondante de la prise et pousser
jusqu’au fond.

Cet espace vous est réservé
Inscrivez ci-dessous le numéro de série situé
à l’arrière du bloc. Conservez cette informa-
tion pour vous y reporter à l’avenir.

N

°

de modèle  ____________________

N

°

de série  ______________________

MAC5097

Connaissez ces

symboles de 

sécurite

A T T E N T I O N

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RESQUE DE CHOC ELECTRIQUE, NE PAS ENLEVER

LE COUVERCLE (NI LE PANNEAU ARRIERE). CET APPAREIL NE COMPORTE AUCUNE

PIECE POUVANT TRE REPAREE PAR L’UTILISATEUR. CONFIER SON ENTRETIEN A

UN TECHNICIEN QUALIFIE.

• Una vez que se registre la compra de

su aparato Philips, Ud. tiene derecho a
todas las ventajas correspondientes al
dueño de un producto Philips.

• Sírvase llenar y devolver en seguida

la Tarjeta de Registro de la Garantía
empacada con su aparato y saque
provecho de estas ventajas importantes.

Envie hoy su Tarjeta de Registro de la Garantía 

para recibir todas las ventajas correspondientes.

Verificación

de la garantía

Registre su producto den-
tro de 10 días para confir-
mar su derecho a máxima
protección bajo los térmi-
nos y condiciones de la
garantía de Philips.

Confirmación

del dueño

Su Tarjeta de Registro de
la Garantía comprueba
que Ud. es el dueño del
aparato en caso de robo
o pérdida del producto.

Registro

del modelo

La devolución inmediata de
su Tarjeta de Registro de la
Garantía le garantiza que
recibirá toda la información
y todas las promociones
especiales que le corre-
sponden por ser el dueño
de su modelo.

El símbolo del «rayo» indica
que algún material no aislado
dentro de su unidad podría

resultar en una sacudida eléctrica. Para
la seguridad de todos, favor de no
remover la cubierta del producto.

El «signo de exclamación» le
llama la atención a carac-
terísticas sobre las que Ud.

debe leer la información adjunta
detenidamente para evitar problemas
de funcionamiento y mantenimiento.

ADVERTENCIA:

PARA EVI-

TAR EL RIESGO DE SACUDIDA
ELECTRICA O INCENDIO, NO
EXPONGA ESTE EQUIPO A LLUVIA
NI A  HUMEDAD.

PRECAUCION:

Para evitar

sacudida eléctrica, introduzca la patilla
ancha del enchufe al fondo de la ranu-
ra ancha.

Para uso del cliente:
Escriba abajo el número de serie que se
encuentra en el panel posterior. Guarde
esta información para el futuro.

No. de modelo ____________________

No. de serie  ______________________

MAC5097

Conozca estos 

simbolos de 

seguridad

PRECAUCION

RIESGO DE SACUDIDA ELECTRICA

NO ABRIR

PRECAUCION: PARA REDUCIR EL RIESGO DE SACUDIDA ELECTRICA,NO RETIRE 

LA CUBIERTA (NI EL PANEL POSTERIOR). ESTE APARATONO CONTIENE NINGUNA 

PARTE QUE PUEDA SER REPARADA POREL USARIO. DE SER NECESARIO ALGUN 

SERVICIO O REPARACIONDEL APARATO, LLEVELO UN TECNICO CALIFICADO.

• Once your Philips purchase is registered,

you’re eligible to receive all the privileges
of owning a Philips product.

• So complete and return the Warranty

Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.

Return your Warranty Registration card today to 

ensure you receive all the benefits you’re entitled to.

Warranty

Verification

Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips warranty.

Owner

Confirmation

Your completed Warranty
Registration Card serves
as verification of owner-
ship in the event of prod-
uct theft or loss.

Model

Registration

Returning your Warranty
Registration Card right
away guarantees you’ll
receive all the information
and special offers which
you qualify for as the
owner of your model.

This “bolt of lightning” indi-
cates uninsulated material
within your unit may cause

an electrical shock. For the safety of
everyone in your household, please do
not remove product covering.

The “exclamation point” calls
attention to features for
which you should read the

enclosed literature closely to prevent
operating and maintenance problems.

WARNING:

TO PREVENT

FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.

CAUTION:

To prevent electric

shock, match wide blade of plug to
wide slot, and fully insert.

For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.

Model No. _______________________

Serial No. ________________________

MAC5097

Know these

safety

symbols

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Class II equipment symbol    

This symbol indicates that the unit has a double insulation system.

Símbolo del equipo Clase II    

Este símbolo indica que la unidad tiene un sistema doble de aislamiento.

Symbole d’ un appareil de classe II    

Ce symbole indique que l’appareil est équipé d’un système à double isolation.

1. Lea estas instrucciones.
2. Conserve estas instrucciones.
3. Lea todos los avisos.
4. Siga todas las instrucciones.
5. No utilice este aparato cerca del

agua.

6. Para limpiar el aparato utilice sólo

un trapo seco.

7. No tape las aperturas de venti-

lación. Proceda a su instalación de
acuerdo con las instrucciones del
fabricante.

8. No instale el equipo cerca de fuentes

de calor

– Como radiadores, calentadores,

estufas o cualquier otro aparato (incluyen-
do los amplificadores) generador de calor.

9. No anule la 

seguridad de la
clavija de corriente

(ya sea de tipo polar-
izado o 
con toma de tierra). Las clavijas polarizadas
tienen dos patillas, una más ancha que la
otra. Las que disponen de toma de tierra
tienen dos patillas y una tercera que es la
de conexión a tierra.Tanto la patilla más
ancha como la toma de tierra han sido
incorporadas a la clavija para su seguridad
personal. Si la clavija suministrada con el
equipo no es compatible con su toma de
corriente, consulte a un electricista para
sustituir la toma de corriente obsoleta.

10. Proteja debidamente el cable impi-

diendo

que pueda pisarse o incluso per-

forarse, especialmente en la parte más
próxima a la clavija y en el punto de salida
del equipo.

11. Utilice exclusivamente aquellos dis-

positivos/ accesorios

recomendados

por el fabricante.

12.

Coloque el equipo exclusi-
vamente

sobre aquellos carros,

bases, trípodes, soportes o
mesas especificados por el com-
erciante o vendidos con el
equipo. Cuando utilice un carro,
tenga cuidado al desplazar el
conjunto carro/ equipo para evi-
tar posibles daños por vuelco.

13. Desenchufe el aparato

durante tor-

mentas eléctricas o cuando no vaya a ser
utilizado durante largo tiempo.

14. Confíe el mantenimiento y las

reparaciones

a personal técnico especial-

izado. El equipo deberá repararse siempre
que haya resultado dañado de alguna man-
era, como por ejemplo por daños en el
cable o en la clavija, por derrame de líqui-
do sobre el equipo, por objetos que
hubieran podido introducirse en su interior,
por exposición del equipo a la lluvia o a
ambientes húmedos, cuando el equipo no
funcione con normalidad o cuando hubiera
sufrido algún tipo de caída.

15. Uso de las pilas – ADVERTENCIA:

Para

prevenir escapes en las pilas, que pueden
ocasionar lesiones físicas, daños a
su propiedad o dañar la unidad:

Instale 

todas

las pilas correctamente,

+

-

como está marcado en la unidad.

No mezcle las pilas (

viejas

con 

nuevas

o

de carbono

alcalinas

, etc.).

Extraiga las pilas cuando no vaya a usar la
unidad durante largo tiempo.

EL 6475-S003: 02/8

SAFETY & MAINTENANCE INFORMATION 
(See 

8

)

• Don't expose the set, batteries, CDs or cassettes to

humidity, rain, sand or excessive heat.

• Clean the set with a dry cloth. Don't use any clea-

ning agents containing alcohol, ammonia, benzene
or abrasives as these may harm the set.

• Place the set on a hard and flat surface so that the

system does not tilt. Make sure there is good venti-
lation to prevent the set overheating.

• The mechanical parts of the set contain 

self-lubricating bearings and must not be oiled or
lubricated.

CD player and CD handling

• If the CD player cannot read CDs correctly, use a

cleaning CD to clean the lens before taking the set
to repair.

• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature

can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.

• Always close the CD-tape door to avoid dust on the

lens.

• To clean the CD, wipe in a straight line from the

center towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.

• Never write on a CD or attach any stickers to it.

Tape deck maintenance

To ensure quality recording and playback of the tape
deck, clean parts 

A

B

and 

C

as shown, once a

month. Use a cotton bud slightly moistened with alco-
hol or a special head cleaning fluid to clean the deck.

1.

Open the CD-tape door.

2.

Press 

PLAY 

2

and clean the roller 

C

.

3.

Press 

PAUSE

;

and clean the heads 

A

, and the

capstan 

B

.

4.

After cleaning, press 

STOP

9

.

Note:

Cleaning of the heads can also be done by playing a
cleaning cassette through once.

No sound /power

Volume not adjusted

• Adjust the VOLUME

Power cord not securely connected

• Connect the AC power cord properly

Batteries dead/ incorrectly inserted

• Insert (fresh) batteries correctly

Headphones connected to the set

• Disconnect headphones

Severe radio hum or noise

Electrical interference: set too close to TV, VCR or
computer

• Move the set to increase the distance

Poor radio reception

Weak radio signal

• FM: Adjust the FM telescopic aerial

noPr

indication

During programming radio preset stations, you have
keyed in a preset number that exceeds the maximum
preset number i.e. 40 

• Key in a preset number from 1-40

noCd

indication

CD badly scratched or dirty

• Replace/ clean CD, see Maintenance

Laser lens steamed up

• Wait until lens has cleared

nFCd

indication

CD-R(W) is blank/ not finalized

• Use a finalized CD-R(W)

dAtA

indication

CD contains non-audio files

• Press 

SEARCH 

or 

§

once or more to skip to a

CD audio track, instead of the data file

The CD skips tracks

CD damaged or dirty

• Replace or clean CD

SHUFFLE or PROGRAM is active

• Switch off SHUFFLE / PROGRAM

Poor cassette sound quality

Dust and dirt on the heads, etc.

• Clean deck parts, see Maintenance

Use of incompatible cassette types (METAL or
CHROME)

• Only use NORMAL (IEC 

I

) for recording

Recording does not work

Cassette tab(s) may be broken

• Apply adhesive tape over the missing tab space

Remote control does not function properly (for
AZ1515 model only)

Batteries dead/ incorrectly inserted

• Insert (fresh) batteries correctly

Distance/ angle between the set too large

• Reduce the distance/ angle

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near

water.

6. Clean only with dry cloth.
7. Do not block any ventilation open-

ings. Install in accordance with the
manufacturer´s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.

9. Do not defeat

the safety 
purpose

of the

polarized or 
grounding-type plug. A polarized plug has
two blades with one wider than the other.
A grounding type plug has two blades and
a third grounding prong.The wide blade or
the third prong are provided for your safe-
ty. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord

from being

walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12.

Use only with the cart,

stand, tripod, bracket, or table
specified by the manufacturer or
sold with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus com-
bination to avoid injury from
tip-over.

13. Unplug this apparatus

during lightning

storms or when unused for long periods of
time.

14. Refer all servicing

to qualified service

personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is dam-
aged, liquid has been spilled or objects
have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture,
does not operate normally, or has been
dropped.

15. Battery usage CAUTION

– To  prevent

battery leakage which may result in bodily
injury, property damage, or damage to the
unit:

Install 

all

batteries correctly,

+

and 

-

as

marked on the unit.

Do not mix batteries (

old

and 

new

or

carbon

and 

alkaline

, etc.).

Remove batteries when the unit is not
used for a long time.

EL 6475-E004: 02/8

ACCESSORIES

1 x AC power cord
1 x Remote Control (for 

AZ1515

model only)

TOP AND FRONT PANEL (See 

1

)

1

VOLUME 

3

4

- to adjust volume level.

2

DBB

(

D

ynamic

B

ass

B

oost) - activates a more vivid

bass response.

3

POWER slider

- selects 

TAPE/ RADIO / CD

func-

tion and also the power off switch (

TAPE/ OFF

).

4

BAND

- selects waveband.

5

0-9:

- digit panel

CD: 

- track selection and direct playback;

RADIO:

- selecting a preset station.

6

PROGRAM
CD: 

- programs tracks and reviews the program;

Tuner:

- programs preset radio stations.

7

SEARCH

§

CD: 

- searches backward and forward within a track;
- skips to the beginning of a current track/ previ-

ous/ later track.

RADIO:

- (down, up) tunes to radio stations.

8

MODE

- selects different play modes: e.g. 

REPEAT

or 

SHUFFLE

(random) order.

9

2;

- starts or pauses CD playback.

0

9

- to stop playback;
- erases a CD program.

!

Display

- shows the status of the set.

@

OPEN•CLOSE – 

opens/ closes the CD-tape door

#

REMOTE SENSOR 

- (for 

AZ1515

model only)

infrared sensor for remote control.

$

CASSETTE RECORDER keys:
RECORD 

0

- to start recording.

PLAY 

2

- to start playback.

SEARCH

5  

6

- fast rewinds/ winds tape.

STOP 

9

- stops tape.

PAUSE

;

- pauses playback or recording.

BACK PANEL

%

Telescopic antenna

- improves FM reception.

^

p

- 3.5 mm stereo headphone jack.

Note: The speakers will be muted when headphones

are connected to the set.

&

AC MAINS

- inlet for power cord.

*

Battery compartment 

- for 6 batteries, type 

R-14

UM2

or 

C-cells

.

REMOTE CONTROL (for AZ1515 model only)

1

VOLUME 

3

4

- adjusts volume level.

2

SHUFFLE

- plays all CD tracks in random order.

3

2;

- starts or pauses CD playback.

4

SEARCH 

5

6

- searches backwards/ 

forwards within a track.

5

PRESET

+

,

-

(up, down) - selects a preset radio 

station.

6

TUNING 

§

(down, up) - tunes to tuner stations.

7

9

- to stop playback;
- erases a CD program.

8

¡ 

- skips to the beginning of a current track 

previous/ subsequent track.

9

REPEAT

- repeats a track /program/ entire CD.

CAUTION

Use of controls or adjustments or performance of pro-
cedures other than herein may result in hazardous
radiation exposure or other unsafe operation.

POWER SUPPLY

Whenever convenient, use the AC power supply to
conserve battery life. Make sure you remove the
power plug from the set and wall outlet before 
inserting batteries.

Batteries (not included)

• Insert 6 batteries, type 

R-14

UM-2

or 

C-cells

, (pre-

ferably alkaline) with the correct polarity. (See 

7

)

Remote control (AZ1515 model only)

Insert 2 batteries, type 

AAA

R03

or 

UM4

(prefera-

bly alkaline). (See 

9

)

IMPORTANT!

• Incorrect use of batteries can cause electrolyte lea-

kage and will corrode the compartment or cause
the batteries to burst. 

• Do not mix battery types: e.g. alkaline with carbon

zinc. Only use batteries of the same type for the
set.

• When inserting new batteries, do not try to mix old

batteries with the new ones.

Batteries contain chemical substances, so
they should be disposed of properly.

Using AC Power

1.

Check if the AC power supply, as shown on the

type plate located on the bottom of the set

,

corresponds to your local power supply. If it does
not, consult your dealer or service center.

2.

Connect the power cord to the wall outlet.

3.

To disconnect the power supply, unplug the set
from the wall outlet.

The type plate is located on the bottom of the
set.

BASIC FUNCTIONS

Switching on and off and selecting function

1.

To switch on, adjust the 

POWER slider

to select:

CD

RADIO

or 

TAPE

function, and operate the

respective function controls.

2.

To switch off, adjust the 

POWER slider

to select

TAPE/OFF

and make sure all the 

cassette keys are released.

Note : 

The DBB setting, tuner presets and the volu-

me will be retained in the set's memory.

Adjusting volume and sound (See 

2

)

1.

Press the 

VOLUME 

3

or 

4

controls to adjust the

volume.

2.

Press 

DBB

once or more to select dynamic bass

boost on or off.

DIGITAL TUNER
Tuning to radio stations

1.

Adjust the 

POWER slider

to 

RADIO

.

tu

is displayed briefly and then the radio 

station frequency, waveband and, if pro-
grammed, a preset number are shown. (See 

3

)

2.

Press 

BAND

once or more to select your wave-

band.

3.

Press and hold 

SEARCH

or 

§

until the 

frequency in the display starts running.

The radio automatically tunes to a station of
sufficient reception. Display shows 

Srch

during automatic tuning.

4.

Repeat step 

3

if necessary until you find the

desired station.

To tune to a weak station, press 

or 

§

briefly and

repeatedly until you have found optimal reception.

To improve radio reception:

• For 

FM

, extend, incline and turn the telescopic

antenna. Reduce its length if the signal is too
strong.

• For 

AM

, the set uses a built-in antenna. Direct this

antenna by turning the whole set.

Programming radio stations

You can store up to a total of 40 radio stations in the
memory, manually or automatically (Autostore).

Manual programming

1.

Tune to your desired station (see Tuning to radio
stations).

2.

Press 

PROGRAM

to activate programming.

Display: 

Pr -- 

and 

PROG

flashes.

3.

Use the digit panel on the set to key in a number,
1-40, to select a preset station. E.g. press 1,1 if
you want to store your station as preset 11. (See

4

)

Remote control

(

AZ1515

models only): Press

PRESET

+

-

once or more to select a preset sta-

tion.

4.

Press 

PROGRAM

to confirm.

5.

Repeat steps 

1-4

to store other stations.

Note :

You can erase a preset station by storing

another frequency in its place.

IMPORTANT SAFETY INSTRUCTIONS

English

CONTROL/POWER SUPPLY

1.

Lisez ces instructions.

2.

Conservez ces instructions.

3.

Respectez les avertissements.

4.

Suivez toutes les instructions.

5.

N’utilisez pas cet appareil à proximité d’une

source d’eau.

6.

Nettoyez l’appareil uniquement avec un chif-

fon sec.

7.

N’obstruez aucun orifice de ventilation.

Installez l’appareil selon les instructions du

fabricant.

8.

N’installez pas l’appareil près d’une source de

chaleur

comme par exemple des radiateurs, bouches

de chaleur, cuisinières, ou autres appareils (même des

amplificateurs) dégageant de la chaleur.

9.

Ne détruisez pas la sécurité 

incorporée dans la

prise de terre ou prise

polarisée fournie. Une 

prise polarisée est dotée de

deux lames 

dont une plus large que l’autre. Une prise de terre est

dotée de deux fiches semblables et d’une troisième,

plus large, qui assure la mise à la terre pour votre

sécurité. Si la prise fournie ne convient pas à la prise

murale dont vous disposez, consultez un électricien

pour remplacer et adapter votre prise murale.

10. Protégez le cordon d’alimentation

pour éviter

de marcher dessus ou de le pincer particulièrement

aux endroits des prises, mâles et femelles, et au point

de raccordement sur l’appareil lui-même.

11. Utilisez uniquement des accessoires ou

options

recommandés par le fabricant.

12.

Utilisez uniquement un meuble

sur roulettes

, un support, un pied, une

étagère ou une table de type recom-

mandé par le fabricant. Si vous utilisez un

meuble sur roulettes, veillez à le déplacer

avec précaution afin d’éviter tout acci-

dent corporel si l’équipement se renver-

sait.

13. Débranchez l’appareil

pendant les orages ou s’il

doit rester inutilisé pendant une période de temps

prolongée.

14. Pour toute réparation,

faites appel à un personnel

qualifié. Une réparation sera nécessaire si l’appareil a

subi des dommages tels que détérioration du cordon

d’alimentation ou de la prise, liquide renversé sur l’ap-

pareil, ou encore si un objet est tombé dessus, si l’ap-

pareil a été exposé à la pluie ou à l’humidité, s’il ne

fonctionne pas correctement ou s’il a fait une chute.

15. PRÉCAUTION d’emploi des piles 

– Afin d’éviter

toute fuite des piles qui risquerait de causer des

blessures corporelles, des dommages matériels, ou

d’endommager l’appareil :

Installez 

toutes

les piles correctement,

+

et

-

tels

qu’indiqués sur l’appareil.

Ne mélangez pas les piles (pas de piles 

neuves

avec

des 

usagées

ou de piles au 

carbone

avec des 

alca-

lines

, etc.).

Enlevez les piles lorsque l’appareil reste inutilisé pen-

dant une longue période.

EL 6475-F003: 02/8

Autostore

Autostore automatically starts programming radio sta-
tions from preset 1. Available stations are program-
med in order of waveband reception strength: FM, fol-
lowed by AM. Any previous presets e.g. manually pro-
grammed will be erased.
• Press 

PROGRAM

for 4 seconds or more to activate

autostore programming.

The display shows 

AUtO

PROG

blinks, 

followed by the radio station details when
stored.

After all stations are stored, the first preset station
will then automatically play.

To listen to a preset station

• Direct Easy Access: use the digit panel on the set

to key in a number, 1-40, to select a preset station.

• Remote control (

AZ1515

models only): optionally,

press 

PRESET

+

,

-

to select your preset station.

CD PLAYER

Playing a CD

This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.

1.

Adjust the 

POWER slider

to 

CD

.

2.

Insert a CD with the printed side facing up and
close the door.

noCd

if no CD inserted/ CD dirty, incorrectly

inserted or damaged.

nFCd

if you have inserted a non-finalized CD-

R(W).

3.

Press 

2;

to start playback.

dAtA

if your CD contains non-audio i.e. data

files.

4.

To pause playback press 

2;

. Press 

2;

again to

resume play.

Display: 

2

flashes during pause.

5.

To stop CD playback, press the 

9

button.

Note : 

CD play will also stop when:

- the CD-tape door is opened
- the CD has reached the end
- you select 

TAPE

or 

RADIO

function.

Selecting a different track

There are 2 ways:

Direct Easy Access

• Key in the number of the track using the digit panel

on the set. 

SEARCH 

or 

§

• Press 

SEARCH 

or 

§

once or repeatedly to sel-

ect your track.

Finding a passage within a track

1.

Press and hold 

SEARCH 

or 

§

.

– The CD is played at high speed and low volume.

2.

When you recognize the passage you want,
release 

or 

§

to resume normal playback.

Note : 

During a CD program or if SHUFFLE/ REPEAT

active, searching is only possible within a track.

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes
before or during playback, and combine the modes
with PROGRAM. (See 

5

)

SHUFFLE

- tracks of the entire CD/ program are play-

ed in random order

SHUFFLE REPEAT ALL

- to repeat the entire CD/

program continuously in random order

REPEAT ALL

- repeats the entire CD/ program

REPEAT

- plays the current track continuously

1.

To select play mode, press 

MODE

once or more.

2.

Press 

2;

to start playback if in the stop position.

3.

To select normal playback, press 

MODE

repeated-

ly until the various modes are no longer displayed.
– You can also press the 

9

button to cancel your

play mode.

Programming track numbers

In the stop position, select and store your CD tracks in
the desired sequence. Up to 20 tracks can be stored in
the memory.

1.

Press 

SEARCH 

or 

§

on the set to select your

desired track number.

2.

Press 

PROGRAM

.

Display: 

PROG

Pr

and your selected track

number. (See 

6

)

If you attempt to program without first 
selecting a track number, 

noSE

is shown.

3.

Repeat steps 

1-2

to select and store all desired

tracks.

Display: 

FULL

if you try to program more

than 20 tracks.

Reviewing the program

In the stop position, press and hold 

PROGRAM

until

the display shows all your stored track numbers in
sequence.

Erasing a program

You can erase the program by:
• pressing 

9

twice

CLr

is displayed briefly and 

PROG

disappears.

• You select 

TAPE

or 

RADIO

function.

CASSETTE RECORDER

Cassette playback

1.

Adjust the 

POWER slider

to 

TAPE

.

2.

Insert a cassette as shown and close the door.

3.

Press 

2

to start playback.

Display: shows 

tAPE

throughout tape 

operation.

4.

To pause playback press 

PAUSE

;

. Press again to

resume.

5.

Press 

SEARCH 

5

or 

6

to fast wind the tape. 

6.

To stop the tape, press 

STOP

9

.

The keys are automatically released at the end of a
tape and the set switched off, except if 

PAUSE

;

has

been activated.

General information on recording

• Recording is permissible insofar as copyright or.

other rights of third parties are not infringed.

• For recording, use only NORMAL type cassettes

(IEC type 

I

) on which the tabs have not yet been

broken. This deck is not suited for recording on
CHROME (IEC 

II

) or METAL (IEC 

IV

) type casset-

tes.

• The best recording level is set automatically.

Altering the 

VOLUME

or 

DBB

controls will not

affect the recording.

• To protect a tape from accidental erasure, break

out the tabs. If you wish to record again, cover the
tabs with a piece of adhesive tape. 

CD Synchro Start Recording

1.

Adjust the 

POWER slider

to 

CD

.

2.

Insert a CD and if desired, program track numbers.

3.

Insert a suitable tape into the cassette deck and
close the door.

4.

Press 

RECORD 

0

to start recording.

– Playing of the CD program starts automatically

from the beginning of the program. You don't
need to start the CD player separately.

To select and record a particular passage 
within a CD track:

• Press 

SEARCH 

or 

§

. Release the control when

you recognize the passage you want.

• To pause CD playback, press 

2;

.

• Recording starts from this exact point in the track

when you press 

RECORD 

0

.

5.

To pause recording, press 

PAUSE

;

. Press

PAUSE

;

again to resume recording. 

6.

To stop recording, press 

STOP

9

.

Recording from the Radio

1.

Tune to the desired radio station (see 

Tuning to

radio stations

).

2.

Follow steps 

3-6

, under 

CD Synchro Start 

Recording

.

CONSIGNES DE SÉCURITÉ IMPORTANTES

DIGITAL TUNER

CD PLAYER

CD PLAYER

CASSETTE RECORDER

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

CASSETTE RECORDER

SAFETY AND MAINTENANCE

TROUBLESHOOTING

POWER SUPPLY

DIGITAL TUNER

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA

Knoxville, Tennessee 37914-1810, U.S.A.

Audio

Audio

CD Soundmachine

AZ 1510

 • 

AZ 1515

Read this manual first!

Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.

For fast help, call us first!
      1-800-531-0039

Thank you for making Philips a part of your home!

S

EE

W HY INS

ID

E

IM

PO

RTAN

T

!

Return 

your Warranty

Registration Card

within 10 days

Printed in China

W

CLASS 1

LASER PRODUCT

AZ 1510
AZ 1515

3140 115 3028.1

English

F

ran

ç

ais

Espa

ñ

ol

Environmental information

We have done our best to reduce the packaging and make it easy to separate into 3 materials:
cardboard, expandable polystyrene, polyethylene.

Your set consists of materials which can be recycled if disassembled by a speciali-
zed company. Please observe the local regulations regarding the disposal of packa-
ging, dead batteries and old equipment.

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service center.

WARNING: 

Do not open the set as there is a risk of electric shock. Under no cir-
cumstances should you try to repair the set yourself, as this will
invalidate the warranty.

Remote Control for
AZ1515 model only

AC Polarized

Plug

Prise 

polarisée C.A.

English

:This digital apparatus does not exceed the Class B limits for radio noise emis-

sions from digital apparatus as set out in the Radio Interference Regulations of the Cana-
dian Department of Communications.

Français

: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les 

limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur
le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada.

Canada

A

A

B

C

X

DBB

2

AM

3

8

FM 

PROG

4

DBB

PROG

SHUFFLE

5

PROG

6

7

9

Clavija

polarizada

de CA

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that

may cause undesired operation.

L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10.
Fonctionnement soumis aux deux conditions suivantes :
1. Cet appareil ne doit pas provoquer d’interférences nuisibles, et
2. Cet appareil doit accepter toute interférence reçue, y compris les interférences

susceptibles de provoquer un fonctionement peu satisfaisant.

El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10.
Funcionamiento dependiente de dos condiciones siguientes:
1. Este aparato no puede provocar interferencia dañina, y
2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las

interferencias que pueden provocar un funcionamiento insuficiente.

VOLUME

SEARCH

PRESET

TUNING

REPEAT

SHUFFLE

SEARCH

+

-

40 PRE

SET

DIG

ITAL

TUN

ER

1

9

8

6

7

2

4

3

5

&

%

^

*

2

1

3 4

9

!

@

#

$

0

6

5

7

8

Remote Control for
AZ1515 model only

1

Meet Philips at the Internet

http://www.philipsusa.com

PORTABLE AUDIO

One Year  Free  Exchange

This product must be carried in for an exchange.

LIMITED WARRANTY

WHO IS COVERED?
You must have proof of purchase to exchange the product.
A sales receipt or other document showing that you pur-
chased the product is considered proof of purchase. Attach
it to this owner’s manual and keep both nearby.

WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For one year thereafter, a defective or inoperative product
will be replaced with a new, renewed or comparable prod-
uct at no charge to you. A replacement product is covered
only for the original warranty period.When the warranty
on the original product expires, the warranty on the
replacement product also expires.

WHAT IS EXCLUDED?
Your warranty does not cover:

labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.

product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause
not within the control of Philips.

reception problems caused by signal conditions or
cable or antenna systems outside the unit.

a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.

incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of
incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is not
limited to, prerecorded material, whether copyrighted
or not copyrighted.)

a product used for commercial or institutional purposes.

WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the
product is officially distributed by Philips. In countries
where Philips does not distribute the product, the local
Philips service organization will attempt to provide a
replacement product (although there may be a delay if the
appropriate product is not readily available).

BEFORE REQUESTING EXCHANGE...
Please check your owner's manual for assistance. If you
have additional questions, call us at 1-800-531-0039.

EXCHANGING A  PRODUCT  IN  U.S.A.,
PUERTO RICO, OR U.S.VIRGIN ISLANDS...
Contact 1-800-531-0039 to arrange an exchange. Or, ship
the product, insured and freight prepaid, and with proof of
purchase enclosed, to the address listed below.

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN  37745

(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied war-
ranties, including implied warranties of merchantability and fit-
ness for a particular purpose, are limited in duration to the
duration of this express warranty. But, because some states do
not allow limitations on how long an implied warranty may
last, this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA...
Please contact Philips at:

1-800-661-6162 (French Speaking)

1-800-531-0039 (English or Spanish Speaking)

(In Canada, this warranty is given in lieu of all other war-
ranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or fit-
ness for a particular purpose. Philips is not liable under any
circumstances for any direct, indirect, special, incidental or
consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)

REMEMBER...
Please record below the model and serial numbers found
on the product. Also, please fill out and mail your warranty
registration card promptly. It will be easier for us to notify
you if necessary.

MODEL #

__________________________________

SERIAL #

__________________________________

EL6095T004 / 8-02

This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.

Philips, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171

AZ1510/17  4/11/02  9:52  Page 1

Summary of Contents for AZ 1510











Reviews: