![background image](http://html.mh-extra.com/html/philips/aquagenic-quadra-hq7405/aquagenic-quadra-hq7405_service-manual_297468001.webp)
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
Shaver
HQ7405
AQUAGENIC
QUADRA
05/04
PRODUCT INFORMATION
Features
- Main shaver
- Constant motor voltage
- Electronic push on/off
- Washable
Safety information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Input voltage
: 100-240 V, 50/60 Hz
- Motor voltage
: 6.2 V
- Shaving heads
: HQ6 - 4822 690 10214
- SAP coding
: HQ7405
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- Think by assembly on right placing of the trimmer.
REPAIR INSTRUCTION
- Remove shaving unit, to prevent damages during repairing.
- Remove screws A1 (2x), open trimmer for screw.
- Take cover from housing (trimmer must be closed).
- Remove bracket (14 and 21).
- The PCB-board can now be removed out of the housing.
- Remove the connecting strip from the motor by
dis soldering.
- Remove screws B1 (2 x), now the motor and hairchamber
can be removed out of the housing.
- Detach the motor springs (17) from the gearwheel unit
with a small screwdriver.
OPTIONAL (accessories)
- No specific issues