background image

Service Manual

Contents

This service manual contains information of different types of models.
Make sure to refer to the section describing your model. 

TYPE A

46PFL3608/F7

PHILIPS

(Serial No.: DS1, DS2)

46PFL3908/F7

PHILIPS

(Serial No.: DS1, DS2)

46PFL3908/F8

PHILIPS

(Serial No.: XA1, XA2)

46PFL3608/F7 A

PHILIPS

(Serial No.: DS3)

TYPE B

46PFL3708/F7

PHILIPS

(Serial No.: DS1)

46PFL3708/F8

PHILIPS

(Serial No.: XA1)

46” LCD TV

chassis PL13.14

140224

© 2014 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, 
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written 
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto 
is strictly prohibited.  

Information in this document is subject to change without notice. Funai reserves the right to change the content 
herein without the obligation to notify any person or organization of such changes.  

 with the 

 design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way 

without the express written consent of Funai. All other trademarks used herein remain the exclusive property of 
their respective owners. Nothing contained in this manual should be construed as granting, by implication or 
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any 
other content in this manual is strictly prohibited.  Funai shall aggressively enforce its intellectual property rights 
to the fullest extent of the law.

This service manual contains information of different types of models.
Make sure to refer to the section describing your model. 

Summary of Contents for 46PFL3608/F7

































































































Reviews: