![background image](http://html.mh-extra.com/html/philio/pac01/pac01_quick-start-manual_1537947001.webp)
PAC01
Z-Wave JEM-A Adapter
Fig 1. Assembling & Wiring
Introduction
PAC01 is a security enabled wireless JEM-A Adapter, based on Z-Wave Plus technol-
ogy. Z-Wave Plus
TM
enabled devices displaying the Z-Wave Plus
TM
logo can also be
used with it regardless of the manufacturer, and can also be used in other manufac-
turer’s Z-Wave
TM
enabled networks. Z-Wave controller can On/Off the thermostat by
sending Thermostat Setback command.
PAC01 is a transceiver which is a security enabled device which based on
Z-Wave Plus technology, and it is fully compatible with any Z-Wave
TM
enabled
network. Since PAC01 supports Security Command Class, it can learn with a Se-
cured enabled controller to fully utilize the device. Its functionality and supported
command classes is identical when included as a secure and non-secure device.
Adding to Z-Wave
TM
Network
In the front casing, there is an include button with LED indicator below which is used
to carries out inclusion, exclusion, reset or association. When first power applied, its
LED flashes on and off alternately and repeatedly at 2 second intervals. It implies
that it has not been assigned a node ID.
The table below lists an operation summary of basic Z-Wave functions. Please refer
to the instructions for your Z-Wave
TM
Certificated Primary Controller to access the
Setup function, and to Add/Remove/associate devices
Function
Description
Annotation
1