FP-01C
Front panel for ST-01 Speed gate
1
CONTENTS:
ACS-controller configuration for working with the card capture reader in the PERCo-Web ...... 8
CT/L14, CT13 configuration in Web-interface for working with the card capture reader.......... 12
CT/L04.2, CT03.2 configuration in Web-interface for working with the card capture reader.... 15
1 APPLICATION
FP-01C Front panel for ST-01 Speed gate with a built-in card capture reader (
hereinafter
–
FP-01C
panel) is designed for installation on
ST-01
speed gate and has a built-in card capture
reader for reading and withdrawing proximity cards, issued to the visitors and meant for return at
exit (hereinafter
– guest cards) through the speed gate.
Built-in card capture reader should work together with a proximity card reader and an
ACS-controller. Card reader can be installed inside the panel, in this case reading of the card to be
withdrawn will take place during insert of the card into the card capture reader slot. Card capture
reader also allows to capture the cards with standard badge clips.
Card capture reader can be used as a part of
PERCo
access control systems, in this case data is
transferred via
RS-485 interface from a built-in reader of the card capture reader to the
PERCo
ACS-controller. Card capture reader can also work with third-party controllers, in this case, data is
transferred from a built-in reader of the card capture reader to the controller via Wiegand
interface.
Attention!
Product is supplied as a part of
ST-01
speed gate but to be ordered separately.
Built-in reader is
not included
in a delivery set and has to be purchased separately by the
customer. Reader has to comply with the following characteristics:
overall dimensions (length
× width × height) ....................... not more than 155×68×28
mm
identifiers reading range ................................................................... not less than 40
mm
Product is a constructional part of
ST-01
speed gate and is not supposed to be used separately.
Climatic operation conditions of the product are the same as for
ST-01
speed gate
(GOST 15150-69, category U4, operation in premises with climate control). Installers should also
consider operation conditions of built-in optional equipment.
Label on the inner side of housing contains product name, type, manufacture date and serial
number.
Product in a standard delivery set is packed in transportation crate, which preserves its
components from any damages during transportation and storage.
Overall dimensions of the transportation crate ....................................................... 106
×22×18
cm
Crate weight ................................................................................................................ max 18
kg
Product in the original package should be transported only in closed type cargo transport units (in
railroad cars, containers, closed cars, under decks, by plane, etc.). During transportation and
storage, crates can be stacked no more than 6 layers high.
Summary of Contents for FP-01C
Page 21: ......
