Quick Start Guide
Installing the Unit
Guidance Screen
Mount to the windscreen using suction
mount and ram arm, or unscrew the
ball from the suction mount and use
this for a permanent fixture.
Warning
– Please disconnect the unit from the power
supply, if you need to jump start your vehicle.
PWdoc0007 rev.2.3
12v DC Plug
Plug into 3 pin socket
on vehicle. (If hard
wiring do not remove
the fuse).
Magnetic Receiver
Install on the roof of the
vehicle with arrow
pointing to the front (if
the roof is not metal use
the roof mount plate
supplied).
Warranty Void if suction mount fails !!
- Its is advised that the suction mount
is removed from the windscreen when the unit is not in operation and reat-
tached on a day to day basis.
For a more permanent fixing please detach the ram ball from the suction mount
and secure down in the vehicle.
Brightness
Power On/Off
Touch Screen
