PBH-400 User Manual
* Please refer to the manual at www.croise.co.kr for more information
CE Compliance Information
Partron Bluetooth Headset, hereby declares that this PBH-400 is in compliance with the essential
Requirements and other relevant provisions of Directive 1999/5/EC.
The following information shall also be included in the case of radio equipment intentionally
emitting radio waves : (a) frequency Band(s) : 2.4GHz ISM Band(2.402GHz ~ 2.480GHz);
(b) maximum radio-frequency power transmitted in the frequency band(s) : Max. 4dBm
FCC Compliance Information
FCC ID : 2AD5K-PBH400
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions : This device may not cause harmful interference, and this device must accept any
interference received, including interference that may cause undesired operation.
FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not
expressly approved by the manufacturer may void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure
limits set forth for an uncontrolled environment. This device and its antenna must not be co-
located or operating in conjunction with any other antenna or transmitter.
Information to the user :
NOTE : This equipment has been tested and found to comply with limits for a Class B digital
device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful
interference in a residential installation. This equipment generates, use and can radiate radio
frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However there is no guarantee that interference will not occur in a particular installation,
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on.
the user is encouraged to try the correct interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
