USERS GUIDE for PROGRAMMABLE KEYBOARD AND DECODING UTILITIES
Table of Contents for This Users Guide
Section Title
----------------------------------------------------------
1 List of File on the Diskette and Their Purpose
2 User Guide for Keyboard Programming using
K78C, K78M, K120C, K120M, and K128C Utilities
2.1 Introduction to Keyboard Programming Utilities
2.2 Invoking the Programming Utility
2.3 Using the Interactive Mode
3 User Guide of Bar Code and MSR Decoder Utility
KBD-100.EXE
3.1 Introduction to Decoding Setup Utility
3.2 Page 1 - General Configuration
3.3 Page 2 - Bar Code Reader Configuration
3.4 Page 3 - Bar Code Reader Configuration (cont.)
3.5 Page 4 - Magnetic Card Reader Configuration
4 Default Keyboard Layouts
4.1 K78C and K78M Keyboards Default Layout
4.2 K78C and K78M Keyboards Fixed Layout for Layer Two
4.3 K78C and K78M Keyboards Fixed Layout for Layer Three
4.4 K128C Keyboard Default Layout
4.5 K120C and K120M Keyboards Default Layout
1. List of Files On the Diskette and Their Purpose
K78C.EXE 78 keys cherry switch programmable keyboard utility
K78M.EXE 78 keys membrane key programmable keyboard utility
K120C.EXE 120 keys cherry switch programmable keyboard utility
K120M.EXE 120 keys membrane key programmable keyboard utility
K128C.EXE 128 keys cherry switch programmable keyboard utility
KBD-100.EXE Barcode and MSR decoder setup utility
EGAVGA.BGI EGA graphics driver used by above utilities
HERC.BGI MONO graphics driver used by above utilities
README.TXT This users guide
2 User Guide for Keyboard Programming using K78C, K78M, K120C,
K120M, and K128C utilities
2.1 Introduction to Keyboard Programming Utilities
These utility programs are used to program your programmable
keyboard. You can setup up keys, macros, multi-keys, and other
features as best suits your application. Use the utility
program appropriate for your keyboard; see the list of files
in section 1 above. If you are not sure if you have cherry or
membrane switches then please verify with your dealer/reseller.
The utility programs are DOS programs. You cannot use these
programs from within Microsoft Windows (any version). You
must exit to MSDOS (Select "Start" then select "Shutdown"
then select "Restart the Computer in MSDOS Mode").
Before starting this utility, connect a standard PC keyboard
into the pass through keyboard port of your programmable
keyboard. Use this standard keyboard while you are programming.
