Paramount Fitness Ultra UV 004-422-2021-00 Installation & Operation Manual Download

Page: 1 / 24

1555 Detrick Avenue. Deland Florida. 32724-2014
Toll Free: 1-866-649-5551 Phone: 407-600-5751

[email protected] www.ultravioletpools.come

004-422-0003-00 REV 031714

Pool, Spa & Pond
Water Sanitizer 4BJ1

EPA Registered
#084221-AZ-001

INSTALLATION &

OPERATIONS MANUAL

IMPORTANT SAFETY INSTRUCTIONS:

READ COMPLETELY BEFORE PROCEEDINg.

When using this electrical equipment, basic safety precautions should
always be followed, including the following:

WARNINg:

• Follow all applicable electrical codes.
• Turn off power at main source before making any electrical connections

or servicing the unit.

• To reduce the risk of electric shock, injury or death disconnect unit from

power supply

• Follow the instructions or risk of serious injury or death could occur!

UV ExPOSURE & PROTECTION:

UV-A and UV-B radiation can have adverse short and long term effects on
the eyes and skin. Never look directly at a UV lamp that is connected to a
power source. Avoid UV skin exposure at all times.

Summary of Contents for Ultra UV 004-422-2021-00

























Search results

Summary of Contents for Ultra UV 004-422-2021-00

Reviews:

Related manuals for Ultra UV 004-422-2021-00

Brands by name

Popular brands

Paramount Fitness Ultra UV 004-422-2021-00, Installation & Operation Manual

Search results

Summary of Contents for Ultra UV 004-422-2021-00

Reviews:

Related manuals for Ultra UV 004-422-2021-00

Brands by name

Popular brands