![background image](http://html1.mh-extra.com/html/parallax/30055/30055_quick-start-manual_3643596001.webp)
© Parallax, Inc. 2004 - Crawler Kit for Boe-Bot Robot Manual
1
599 Menlo Drive, Suite 100
Rocklin, California 95765, USA
Office: (916) 624-8333
Fax: (916) 624-8003
General: [email protected]
Technical: [email protected]
Web Site: www.parallax.com
Educational: www.stampsinclass.com
Crawler Kit for the Boe-Bot™ Robot (#30055)
The Crawler Kit
This kit allows your Parallax Boe-Bot™ Robot to walk on six legs.
Assembly takes approximately 60 minutes to complete. Before getting
started, take an inventory of the parts in your kit. Use
Fig #1
to identify
each part to the parts list. Once you have inventoried your kit, proceed
to
Step #1
. Parallax Boe-Bot robot (#28132) is sold separately
Recommended Tools
•
Small needle nosed pliers
•
Phillips #1 point screwdriver
•
A sharp-tipped hobby knife,
such as an X-Acto ® knife -OR-
A hand drill with 7/64
″
(2.8 mm) bit
WARNING!
DO NOT use electric screwdrivers
with this kit. Please assemble using
hand tools only to avoid damaging
your Crawler.
Parts List
Item Qty Description
A (2) Crawler
Sides
B (2) Servo
horns
C (4) Legs
D (6) Rubber
feet
E (14)
Nylon
washers
F
(2)
3 mm (1/8
″
) Nylon Spacer
G (4) Push
Arms
H
(2)
19 mm (¾
″
) Nylon Standoffs
I
(4)
25 mm (1
″
) Nylon Standoff
J
(2)
M3x18 Phillips Pan Head Screw
K (10)
M3x12
Phillips Pan Head Screw
L (6)
M3x10 Phillips Pan Head Screw
M
(6)
M3 Hex Nut
N (6)
M3 nylon insert locknuts
O (2) Middle
Leg
P
(6)
M3x6 Phillips Pan Head Screw
Q (12)
Plastic Screw Covers
Fig #1 J
K
L
P
B
A
C
D
E
F G
H I
J
K
L M
N
P
Q
O