![background image](http://html1.mh-extra.com/html/panorama-antennas/wmmgg-7-27/wmmgg-7-27_mounting-instructions_3571873001.webp)
Mounting Instructions
WMMGG-7-27
Introduction
The WMMGG-7-27 is a MiMo 2G/3G/4G antenna incorporating an integrated
active GPS/GNSS antenna.
SW3-687 - Document Version 1.0
Select Position
1.
For a good installation the antenna should be directed towards the strongest network signal. In order to achieve this follow the guide
below.
a.
Connect the antenna to your data card or modem with the antenna adapter and coaxial cable provided.
b.
Ensure that your device is connected to the network and displaying the signal strength indicator.
c.
With the antenna at selected location, rotate it in approximately 45 degree steps – in each position, you may need to wait for up to
one minute to allow the signal strength indicator to update.
Mounting the Antenna Externally
2.
Ensure that the selected mounting location can be safely accessed with the equipment that you have available and mount the antenna so that
it has at least 1 metre (3.3’) of clearance from all obstructions if possible. The antenna should not be mounted directly on to metal walls or
backing on to metal masts or poles. If the antenna must be mounted to such a surface it must be mounted at the lip of the roof or the very
top of the pole such that the body of the antenna is elevated clear of the metal surface. To maintain GPS/GNSS performance the antenna
should not be mounted under roof structures or overhangs.
Electrical Safety Note
This product contains an active GPS/GNSS antenna (part
number SR8-HG26). Rated voltage: 3-5VDC rated current:
20mA maximum.
The supply to this device must be provided with overcurrent
protection of 1A maximum.
Note
Signal strength indication may be displayed either:
a.
Graphically with bars, (where more bars is a better signal), or
b.
As a signal level value in dBm (e.g. -80) - in this case, the lower the negative number, the better the signal, (i.e. -71 is
stronger signal than -83).
The GPS/GNSS antenna requires the antenna to maintain the correct vertical orientation (with cables at the base) and the antenna should
be mounted so that the GPS/GNSS antenna located at the top of the antenna housing has a clear and un-obstructed view of the sky.
P A N O R A M A
A N T E N N A S
TOLERANCES UNLESS OTHERWISE STATED
1 DEC. PLACE
0 DEC. PLACE
2 DEC. PLACES
ANGULAR
±0.2
±0.5
±0.1
±1°
155
31
15
155
70
92
SMA PLUGS
TWIN CS29 LOW
LOSS CABLE.
5m LONG.
M6 FIXINGS VIA
2 HOLES 7.0
ANTENNA HOUSING.
WHITE LURAN
S777K (A.S.A.).
UV STABILISED.
GPS/GNSS SMA
PLUG
6m RG174
CABLE
60
44
50 NOMINAL
CLAMPING
POLE
MOUNTING
BRACKET
M6 'V' BOLT
86
40
=70.0=
75
15
36
ISO VIEW
SCALE 1:3
WALL MOUNT BRACKET
(SUPPLIED LOOSE)
PCN REV
DESCRIPTION
DATE
DRAWN
REVISIONS
01019
B
INITIAL ISSUE
18/02/2016
AR
THIS DOCUMENT MUST NOT BE COPIED OR
DISCLOSED TO A THIRD PARTY WITHOUT THE
WRITTEN CONSENT OF PANORAMA ANTENNAS LTD.
DRG.
No.
C
2016 A4
DO NOT
SCALE
SCALE
D.O.CHECK
DESCRIPTION
MATERIAL
FINISH
DIMENSIONS
IN mm
1:3
IC
N/A
ELEVATED ANTENNAS
SHEET 1 OF 1
1000g
A
1
WEIGHT
WMMGG-7-27-5SP
PROJECTION
DENOTES LATEST
ISSUE CHANGES
PRODUCT/ASSEMBLY
JJ
APPROVED
M'BAND MIMO WALL MNT + GPS/GNSS
N/A
DENOTES CRITICAL
VALUE
2
3
4
B
C
E
F
D
A. Mount the antenna
The antenna is supplied with weatherproof mounting hardware for wall or mast mounting and should be fitted with the cable entry at the
bottom.
Mast Mounting
The clamp assembly allows fitting to masts of between 20-50mm
(0.8” – 2”) diameter.