background image

 

TDP43MY Quick Guide 

 

PA26235A01 

Rev. 01  3-2010 

© Panduit Corp. 2010 

 

 

 

The Windows driver for the TDP43MY printer can be installed from your Pan-Mark or Easy-Mark software CD or 

downloaded from http://www.panduit.com then under Product Information, select Downloads. 

 

Adding TDP43MY printer driver to Windows XP/ Vista 32/64 bit using USB connection: 

 

1.  Obtain the TDP43MY Vista driver (TDP43MY_Vista_Drv_4611.exe) from the Web or Easy-Mark CD. 
2.  Double click or run the ab

ove program. When prompted “An unidentified program wants access to your computer” select 

“Allow”. (

Windows Vista only

). 

3. 

On the next screen click on the “Setup” button. 

4. 

The Installation wizard will appear. Click “Next >” 

5. 

Select “TDP43MY” on the right box and click “Next >” 

6. 

In the Options screen select “USB001” and click Finish. 

7.  The installation wizard will close automatically meaning the installation of the drive was successful. 
8. 

Note: When you connect the printer for the first time you will get the “Found New Hardware” wizard. Leave this window 
open until you install the driver (steps 1-

7). When complete select “Don’t show this message again for this device.” 

9. 

Windows will send a message  “The hardware could not install successfully”. Ignore this message as the hardware and 
driver are installed.

 

Adding TDP43MY printer driver to Windows NT/2000 using Parallel or Serial Port: 

 

1. 

After installing Easy-Mark or Pan-Mark, go to Start/Printers and Faxes, click Add A Printer. 

2. 

Follow Install Wizard. 

3. 

At Install Printer Software 

– Select “Have Disk” & “Browse”. 

4. 

The TDP43MY is located in either of the following directories: 

a. 

Easy-Mark: C:\Program Files\Easy-Mark\Printer Drivers\TDP43M 

b. 

Pan-Mark: C:\Program Files\pmus\drivers\TDP43M 

5. 

Double click OEMSETUP.inf 

6. 

Click OK, then Next until you get to Finish.  Click Finish. 

7. 

Continue with Printer Settings listed below

 

Adding TDP43MY printer driver to Windows 98/ME if using Parallel or Serial Port: 

 

1. 

After installing Easy-Mark or Pan-Mark, go to Start/Settings/Printers, select Add Printer. 

2. 

Follow the install Wizard.   

3. 

At Install Printer Software select “Have Disk” & “Browse”. 

4. 

The TDP43MY driver is located in either of the following directories: 

a.  Easy-Mark: C:\Programs Files\Easy-Mark\Printer Drivers\TDP43M 
b.  Pan-Mark: C:\Program Files\pmus\Drivers\TDP43M 

5. 

Double click OEMSETUP.inf 

6. 

Click OK, then Next until you get to Finish. Click Finish. 

7. 

Continue with Printer Settings listed below. 

 

 

 

 

 

 

NOTE: In the interest of higher quality and value, Panduit products are continually being 
improved and updated.  Consequently, pictures may vary from the enclosed product.   

 

Website:  www.panduit.com 

Email:  [email protected] 

 

EU Website: 

www.panduit.com/emea 

 

EU Email:  

emeatoolservicecenter 

@panduit.com

 

 

Panduit Corp. • USA Headquarters • Tinley Park, IL 

Tel:  888-506-

5400, ext. 3255 • Fax:  630-759-7532 

 

Panduit 

Europe • EMEA Service Center 

Tel: +31 (0) 546 580 452 • Fax: +31 (0) 546 580 441 

 

Reviews: