INSTRUCTIONS CM385E
© Panduit Corp. 2009, 2010
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
N
ET
-A
CCESS
Cabinet for Cisco Nexus 7018 Switch
CN3
CN7018-EXT
CN7018-EXTND*
CNAE7018
Page 1 of 12
CNPS7018*
Component Guide
(1) Base Cabinet
(2) Cable Management Finger Kits
(1) Hardware Kit
(2) #12-24 Threaded Equipment Rail Sets
(2) Top Side Extensions
(2) Top Front/Rear Extensions
(2) Bottom Door Shoe Extensions
(2) Bottom Side Extensions
(1) Inlet Duct Assembly
(2) Side Panels
(1) Hardware Kit
(2) Split Door Sets
(1) Exhaust Duct Assembly
(1) Bottom Duct Assembly
For installation instructions for the CN3 cabinet, please reference instruction sheet
CM317C
.
(2) Vertical Side Supports
(4) Lower Horizontal Supports
(1) Inlet Duct Seal Bracket
(5) Mounting Brackets
#2 Phillips Screwdriver
Needle Nose Pliers
1/8” Allen Key
1/2” Socket Wrench
3/8” Socket Wrench
TOOL LIST
7/16” Socket Wrench
5/16” Socket Wrench
3/8” Wrench
(1) Hardware Kit
#3 Phillips Screwdriver
*(1) CNPS7018 kit is needed
per cabinet side
*CN7018-EXTND does not contain doors
(1) Hardware Kit
