background image

Product is in conformity with Electromagnetic Compatibility

Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC

Pandora would like to thank you for

 choosing our service-security system

Pandora Elite v2 is a car service-security system built for cars with on-board voltage of 12V. It is 

a complex engineering solution, which includes unique and modern technological software and 

hardware solutions.

When building the Pandora Elite v2 we were using the most up-to-date electronics from world’s 

best manufacturers. The device is built using high-precision mounting and control machinery, thus 

we guarantee highest possible quality, reliability and stable technical characteristics for the whole 

operation period.

The Pandora Elite v2 has a cryptographically strong authorization code with unique dialog algorithm 

and individual encryption key on every device. It guarantees protection form electronic hacking for the 

whole operation period.

The system is built for your convenience: it’s ergonomic, reliable, has the highest security and 

service characteristics, 3 years unconditional warranty and free service and support. We are happy to 

provide any support we can – feel free to use our online support.

WARNING! I

t

 

Is

 

stRoNGly

 

AdvIsed

 

to

 

hAve

 

pRofessIoNAl

 

cAR

 

mechANIc

 

INstAllING

 

the

 

system

. A

Ny

 

cAR

 

electRoNIcs

 

INstAlleR

 

should

 

be

 

Able

 

to

 

INstAll

 

the

 

system

 

usING

 

INstAllAtIoN

 

scheme

 

IN

 

thIs

 

mANuAl

 

ANd

 

the

 A

lARm

 s

tudIo

 

softWARe

. m

ost

 

feAtuRes

 

ARe

 

hIGhly

 

depeNdeNt

 

oN

 

competeNt

 

INstAllAtIoN

. o

uR

 

systems

 

ARe

 

thoRouGhly

 

tested

 

foR

 

quAlIty

so

 

If

 

A

 

feAtuRe

 

fAIls

 

to

 

pRoduce

 

expected

 

Result

most

 

lIkely

 

the

 

pRoblem

 

Is

 

IN

 

ImpRopeR

 

INstAllAtIoN

.

This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter, or operated in 

temperatures outside -40 to +85° C range. All system components must be installed only in a car interior.

The base  unit, remote control and radio tags fulfil with the IP40 category of protection against water.

Our web-site: pandorainfo.com

Customer support: [email protected]

Summary of Contents for Elite v2




























Reviews: