WIRELESS USER GUIDE (LARGE MODEL)
Note: The
TALK
button is represented by a silver button depicting a small green
handset. The
HANG-UP
button is represented by a silver button depicting a
small red handset. The JOYSTICK is the silver multi-directional pointer in
between these two buttons.
Important: If wireless battery is permitted to completely run out, the unit will not
operate again after recharge unless first powered up. To power up, press and
hold the HANG-UP button for at least 5 seconds.
PLACING A CALL
1)
Press the green
TALK
button.
2)
The system will provide you with a free line.
3)
Dial the phone number you desire.
ANSWERING A CALL
1)
While the phone is ringing, press the green
TALK
button.
2)
Speak to the caller.
SPEAKERPHONE
1)
At any time, press the
TALK
button once for a normal call or twice for a
speakerphone call. Press
TALK
to toggle between normal and speaker.
PLACING A CALL ON HOLD
1)
Press the silver HOLD button located under the TALK button.
2)
The call will be placed on hold. You can take the call off hold on any
phone.
3)
Press the red
HANG-UP
button to hang up the wireless phone.
RETRIEVING A CALL THAT IS ON HOLD
1)
The silver joystick in the center of the phone is the primary means of
navigating menus.
2)
Toggle the joystick to the right.
3)
The display will list the phone lines. The call on hold will be indicated with
a small flashing circle.
4)
Use the joystick to highlight the line on hold.
5)
Press the TALK button to retrieve call.
6)
The system will provide you with this line that was on hold.
7)
HINT: At step 4, you can alternatively press a keypad digit to select
desired line.
SELECTING A SPECIFIC LINE
1)
Toggle the joystick to the right.
2)
The display will list the available phone lines, features or gates.
3)
Use the joystick to scroll and highlight the desired line.
4)
Press the TALK button.
5)
The system will provide you with this line.
