background image

© Panasonic System Networks Co., Ltd. 2014
Unauthorized copying and distribution is a violation
of law.

ORDER NO. KMS1411488SE

Hybrid IP-PBX

Model No.

KX-NS700
KX-NS720 Series

                        

Power Supply Unit Addition

TABLE OF CONTENTS

PAGE

PAGE

1 Technical Descriptions

-----------------------------------------

2

1.1. Power Supply Unit----------------------------------------- 2

1.1.1. Block Diagram and Circuit Description of

PSU ------------------------------------------------------ 2

1.2. AC input, Rectification Smoothing Circuit ----------- 2
1.3. Main Converter--------------------------------------------- 3
1.4. DC Switch and DC Output Circuit --------------------- 4
1.5. AC Alarm Circuit and DC Alarm Circuit -------------- 5

2 Troubleshooting Guide

-----------------------------------------

6

2.1. Power Supply Unit----------------------------------------- 6

2.1.1. No Voltage is Output at All (1) --------------------- 6
2.1.2. No Voltage is Output at All (2) --------------------- 7
2.1.3. 41V are Not Output----------------------------------- 8

3 Schematic Diagram

----------------------------------------------

9

3.1. Power Supply Board ------------------------------------ 14
3.2. Waveform ---------------------------------------------------- 9

4 Printed Circuit Board

------------------------------------------

15

4.1. Power Supply Board ------------------------------------ 15

4.1.1. Component View ------------------------------------ 15
4.1.2. Bottom View ------------------------------------------ 16

5 Exploded View and Replacement Parts List

-----------

17

5.1. Power Supply Unit --------------------------------------- 17
5.2. Replacement Parts List--------------------------------- 18

5.2.1. Power Supply Board-------------------------------- 18

Please file and use this supplement manual together with the service manual.

Summary of Contents for KX-NS700





















Reviews: