background image

English

Read through the Installation Instructions before you proceed 
with the installation.
In particular, you will need to read under the “Safety 
Precautions” on page 2.

Installation Instructions

Wireless Remote Controller

Model No.

 

CZ-RWSU3

Panasonic Corporation

1006 Kadoma, Kadoma City, Osaka, Japan

H0916-0

CV6233317755

Panasonic Corporation
http://www.panasonic.com

Contents

Safety Precautions ...................................... 2
Part Names ................................................... 3
Supplied accessories .................................. 3
Speci

fi

 cations .............................................. 3

Installation Precautions .............................. 4

Installation Location for the Receiver ............... 4

Mounting ...................................................... 4

Installing the Receiver ...................................... 4

Wiring ........................................................... 5

Basic Wiring Diagram ....................................... 5
Wiring for the Receiver ..................................... 5

Settings ........................................................ 6

Setting for receiver ........................................... 6
Setting for Wireless Remote Controller ............ 6
Test Operation .................................................. 8
Self-diagnostics table and 
detected contents ............................................. 9

Summary of Contents for CZ-RWSU3











Reviews: