background image

English

Español (LE)

Instrucciones de Operación
Aire Acondicionado

2-13

Antes de utilizar la unidad, lea atentamente estas
instrucciones de funcionamiento y consérvelas como 
futuro elemento de consulta.
El instalador debe guardar y leer las Instrucciones de 
instalación incluidas antes de la instalación. 
El control remoto viene embalado en la unidad interior y 
debe ser retirado por el instalador antes de la instalación.

Operating Instructions
Air Conditioner

14-25

Before operating the unit, please read these operating 
instructions thoroughly and keep them for future reference.
The included Installation Instructions should be kept and 
read by the installer before installation. 
Remote control is packaged in the indoor unit and 
removed by the installer before installation.

Instrucciones de Operación

Aire Acondicionado

Inverter Technology
Tecnología Inverter

Modelo
Unidad Interior 

Unidad Exterior

CS-PE12UKV-6
CS-PE18UKV-6
CS-PE24UKV-6

CU-PE12UKV-6
CU-PE18UKV-6
CU-PE24UKV-6

ACXF55-18740

ACXF55-18740_FC0118-0.indb   1

ACXF55-18740_FC0118-0.indb   1

12/21/2017   10:05:20 AM

12/21/2017   10:05:20 AM

Summary of Contents for Aero CS-PE12UKV-6





























Reviews: