—
1
—
—
2
—
OPERATING INSTRUCTION
With mechanical prevent
SAFETY INFORMATION
The following safety information must be observed to ensure
maximum personal safety during the operation of this meter:
Do not use the meter if the meter or test leads look
damaged, or if you suspect that the meter is not
operating properly.
Never ground yourself when taking electrical
measurements. Do not touch exposed metal pipes,
outlets, fixtures, etc., which might be at ground potential.
Keep your body isolated from ground by using dry
clothing, rubber shoes, rubber mats, or any approved
insulating material.
Turn off power to the circuit under test before cutting,
unsoldering, or breaking the circuit. Small amounts of
current can be dangerous.
Use caution when working above 60V dc or 30V ac rms.
Such voltages pose a shock hazard.
When using the probes, keep your fingers behind the
finger guards on the probes.
Measuring voltage which exceeds the limits of the
multimeter may damage the meter and expose the
operator to a shock hazard. Always recognize the meter
voltage limits as stated on the front of the meter.
Never apply voltage or current to the meter that
exceeds the specified maximum:
—
1
—
—
2
—
DIGITAL MULTIMETER
OPERATOR’S MANUAL
ORDER CODE: OXD-516-4320M
CZ
HU
PL
SK
TH
cromwell.co.uk
• Terminal blocking prevention
• Temperature measurement
• Extra large display
• Hold function
• Backlight
• Tilt stand
• Voltage DC 200mV
̴
1000V
• Voltage AC 2V
̴
700V
• Current DC 2mA
̴
20A
• Current AC 2mA
̴
20A
• Resistance 200Ω
̴
20MΩ
• Capacitance 2nF
̴
200µF
• Diode test
• Continuity buzzer
• Frequency 20kHz
• CAT II 1000V
• Test Leads
• Temperature Probe
