(866) OUTLAWS www.outlawaudio.com
Limited Warranty
is warranty protects the owner of the Outlaw Audio Wire-
less OAW4-Tx and OAW4-Rx (the PRODUCT) for two (2)
years from the date of purchase.
is warranty covers all defects in material and workmanship
with the following specific exceptions. ese are:
• Damage caused by improper installation or adjustment
• Damage caused by accident, unreasonable use, neglect, or
acts of God
• Damage from failure to follow instructions contained in
this Instruction Manual
• Damage occurring during shipment
• Damage from the performance of repairs by someone
other than Outlaw Audio
• Units which have been altered or modified in design,
appearance or construction.
is warranty covers only the actual defects within the PRO-
DUCT itself. IT DOES NOT cover costs of installation in (or
removal from) a fixed installation, or normal setup, claims
based on any misrepresentation by the seller, or performance
variations resulting from installation related circumstances
such as signal quality, AC power or incompatibilities with
speakers and/or other system components.
During the warranty period, Outlaw Audio will, at its option,
either repair the defect, or replace the defective product, or
the defective parts, or components thereof at no charge to
the owner for parts and labor covered by this warranty If
necessary repairs are not covered by this warranty, or if a
unit is examined which is not in need of repair, you will be
charged for the repairs and/or the examination. If non-war-
ranted repairs are needed, we will notify you of the esti-
mated cost and ask for your authorization to perform said
repairs.
You must pay shipping charges incurred in getting your
Product to the factory. We will pay the return shipping
charges if the repairs are covered by the warranty. Please save
the original shipping cartons, as the unit MUST be returned
in the original carton and packing.
If your product needs service, please call Outlaw Audio at
(866) 688-5297.
You will need to present the original bill of sale to establish
the date of purchase. In the event that the proof of purchase
cannot be established with the original receipt, the warranty
period shall be determined by the earliest date of manufac-
ture shown on the unit.
In the event that you wish to return your Outlaw Audio
Product back to us, for any reason, please call to arrange for
a Return Authorization Number. is will ensure that your
problem is discussed with a service technician who will de-
termine if there is a quick solution to your problem.
Outlaw Audio shall not be liable for, in any way responsible
for, any incidental or consequential damages of any kind.
Some states do not allow limitations on how long an im-
plied warranty lasts and/or do not allow the exclusion of
incidental or consequential damages; therefore, the limita-
tions and exclusions stated herein may not apply to you.
is warranty gives you specific legal rights; and you may
also have other rights that vary from state to state.
THERE ARE NO WARRANTIES GIVEN BY OUTLAW
AUDIO THAT EXTEND BEYOND THE DESCRIPTION
GIVEN HEREIN. ANY IMPLIED WARRANTIES OF FIT-
NESS FOR PURPOSE SOLD, MERCHANTABILITY, DE-
SCRIPTION, QUALITY OR ANY OTHER MATTERS ARE
LIMITED TO THE TERMS OF THE EXPRESSED LIM-
ITED WARRANTY STATED HEREIN.
Products are sold on the basis of specifications applicable
at the time of sales. Outlaw Audio shall have no obligation
to modify products once they have been sold. is warranty
is applicable only in the United States.
OAW4
Wireless Audio System
Safety Precautions
CAUTION:
To reduce the risk of electric shock, do not remove the cover
(or back). No user serviceable parts inside. Refer to qualified personnel.
WARNING:
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture. is device generates a fair amount of heat.
Make sure nothing blocks the ventilation to the rear panel of the unit.
e lightning flash with arrowhead, within an equilateral tri-
angle, is intended to alert the user to the presence of uninsu-
lated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electrical
shock to persons.
e exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating main-
tenance (servicing) instructions in the literature accompanying
the appliance.
e contents of this manual are Copyright © 2016 by Outlaw
Audio, LLC., and may not be duplicated or reproduced by any
means, whether physical, electronic or otherwise without prior
written consent from Outlaw Audio.
Outlaw Audio and the Outlaw Audio logo are registered trademarks of
Outlaw Audio, LLC.
Specifications are those in effect at the time of printing. Outlaw Audio, LLC.
reserves the right to change specifications or designs at any time without no-
tice without obligation to modify existing units.
FCC Compliance
is device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
is equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. ese limits
are designed to provide reasonable protection against harmful interference
in a residential installation. is equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm
or more should be maintained between this device and persons during
device operation.
To ensure compliance, operations at closer than this distance is not recom-
mended. e antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
OAW4 Wireless Audio System
Congratulations on the purchase of an Outlaw Audio
OAW4 Wireless Audio System. Never before has it
been so easy to distribute audio from one location in
your home or business to another than it is right now.
In this document, we will walk you through the instal-
lation of the OAW4 system and a few of the configu-
rations that are possible with this high performance
wireless audio distribution system.
Specifications
• Wireless 10Hz to 20kHz sound
• Robust and dedicated network for your audio
• Easy setup, get wireless music in seconds
• External Antenna
• Range; Line of sight: 130-150´
• Range; obstructed: 70´
• No interference or delays
•
Flexible multi-zone functionality
•
RF band: 2.4GHz
•
Four Channels
•
SNR 93dB
•
Improved seperation between channels
•
Run multiple Transmitters without interference
Troubleshooting Guide
Once your devices are set up, you should have many years of maintenance
free enjoyment from your system. However, if you should encounter a prob-
lem, refer to the following guide to help you find the solution. If a problem
persists, please contact Outlaw Audio.
Problem Solutions
a. Make sure both transmitter and receiver are
connected to a power supply
b. Switch to supplied USB AC Adapter
a. Make sure your OAW4-Tx and OAW4-Rx
are both set to the same “Zone”
b. OAW4-Rx may be out of range. Try moving
the receiver closer
a. Ensure that your source components are
functioning properly
b. Ensure that the audio levels are configured
for audible output (volume at source and/or
destination may be muted or turned too low)
OAW4-Tx and/or
OAW4-Rx are
connected but
the Power Status
LED does not
light up.
No Wireless
Connection
(OAW4-Tx and
OAW4-Rx Power
LEDs are “Red” and
the Status LED(s)
is flashing blue
every two seconds)
OAW4-Tx and
OAW4-Rx are
connected, but no
audio occurs
Package Content
NOTE:
Please contact Customer Service if any of these items are missing.
Your OAW4 Wireless Audio System ships with
this Instruction Manual and the following items:
is required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed
to rain or moisture, does not
operate normally, or has been
dropped.
• Adjust only those controls
that are covered by the
operating instructions as an
improper adjustment of other
controls may result in damage
and will oen require extensive
work by a qualified technician
to restore the apparatus to its
normal operation.
• Damage Requiring Service
Unplug the apparatus from the
wall outlet and refer servicing
to qualified service personnel
under the following conditions:
When the power-supply cord
or plug is damaged; If liquid
has been spilled, or objects
have fallen into the apparatus;
If the apparatus has been
exposed to rain or water;
If the apparatus does not
operate normally by following
Safety Instructions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus
near water.
• Clean only with dry cloth.
• Do not block any ventilation
openings. Install in
accordance with the
manufacturer’s instructions.
• Do not install near any heat
sources such as radiators,
heat registers, stoves, or
other apparatus that
produce heat.
• Protect the power cord from
being walked on or pinched
particularly at plugs, conven
ience receptacles, and the
point where they exit from
the apparatus.
• Only use attachments/
accessories specified by the
manufacturer.
• Unplug this apparatus during
lighting storms or when un-
used for long periods of time.
• Refer all servicing to qualified
services personnel. Servicing
the operating instructions;
If the apparatus has been
dropped or damaged in any
way, and; When the apparatus
exhibits a distinct change in
performance this indicates
a need for service.
• Object and Liquid Entry
Never push objects of any kind
into the apparatus through
openings as they may touch
dangerous voltage points or
short-out parts that could
result in a fire or electric
shock. e apparatus shall not
be exposed to dripping or
splashing and no objects filled
with liquids, such as vases
shall be placed on the appara-
tus. Don’t put candles or
other burning objects on top
of this unit.
• is device has no power
switch. To disconnect this
device from power supply,
the power cord must be
disconnected.
• e power supply and power
cord for this apparatus is
intended for indoor use only.
• Only use the included A/C
adaptor
