Instruction Manual
Electric Patio Heater
HWM24
Please read these instructions carefully before using your new halogen
heater
Unpack the halogen heater making sure that all the items are present and that there are
no components left in the box and that the heater head is free from any packing material.
Using the detailed drawing follow the steps to assemble your halogen heater.
Do not connect the halogen heater to the electrical supply until all the assembly is com-
plete.
Do not connect the halogen heater to the electrical supply if any of the components or the
power cord is damaged in any way.
If in doubt contact your supplier.
Warning
These appliances must be earthed .
Before installing or replacing the bulb, the appliance must be always being disconnected from the
230V supply.
The appliance must be disconnected from the 230V supply before the lid is opened.
The appliance mist be installed exclusively in perfect horizontal position.
Installation
Patio Heater HWM24 is built with the best quality components in accordance to the prevailing legal
regulations and certified for safety in use. For best results from the appliance please ensure that the
installation is done by a qualified electrician in accordance with the following instructions and taking full
account of current regulations. When using the heater, please carefully follow the instructions and rec-
ommendations below.
Connection to 230 Volts Power Supply
It is important to ensure that the electricity supply is of adequate capacity for the electrical load re-
quired by the appliance being installed.
These appliances must be earthed.
Installation to Wall
a) When fixing the heater to a wall, ensure hinges are in the underside so that the lid hands down in
the open position.
b) Minimum required distances:
250mm from the side wall
500 mm from the ceiling
Installation height above 1.8M
The heater must be fixed to a wall with the bracket supplied to allow adequate ventilation.
Never fix or place heater near flammable or combustible materials.
Generally heaters must be placed at a safe distance (clear space) of at least 2.0m from com-
bustible materials and glass walls. If installed in workshops or garages where inflammable or
combustible paints are used, the heaters must be installed at a distance of at least 4.0m from
the source of danger.
If the heaters are placed in areas where spray painting of any description is taking place, they
should not be used during the painting operations.
Never use the heater in particularly dusty and explosive areas.
www.outtrade.nl
251225743_2.doc
