1
Lens
Main Body
Power Cord
INTRODUCTION
The 360 degrees flush mount motion sensor uses a
passive infrared sensor which reacts to changes in
temperature emitted by the motion of persons or
objects passing through its detecting area. When you
enter the room, it turns on automatically the light to
which it is connected and the light remains lit as long
as the sensor detects any activity in the room. It
however will automatically turn off the light after the
preset turn-off time is expired. During the day, the
light is turned off to save electricity.
With this sensor installed, you get rid of the nuisance
of fumbling in a dark hallway or staircase for a light
switch, thus avoiding danger for the elderly, infirm and
children at night or when it is dark.
Note: Read this entire manual before you start to
install the system.
SAFETY PRECAUTIONS
DO NOT install it when it is raining.
DO isolate the power supply during installation or
maintenance.
DO ensure that the power supply circuit is
protected by a 16 amp circuit breaker or suitable
equivalent fuse.
The unit cannot be installed on the wall (FIGURE
1).
FIGURE 1
IMPORTANT
Installation must be performed by skilled technicians
who are informed about the standards and technical
requirements of the appliance and its proper
installation.
Do not attempt installation unless you have some
experience with household wiring.
Before proceeding with the installation, TURN OFF
THE POWER TO THE LIGHTING CIRCUIT AT
THE CIRCUIT BREAKER OR FUSE BOX TO
AVOID ELECTRICAL SHOCK.
CHOOSING A MOUNTING LOCATION
Avoid aiming the motion sensor at pools, heating
vents, air conditioners or objects which may
change temperature rapidly.
Do not allow sunlight to fall directly on the front of
unit.
The motion sensor is more sensitive to objects
moving across its field of view. It is less
sensitive to an object moving directly towards the
sensor head.
(FIGURE 2)
FIGURE 2
OSLPIR360W
FLUSH MOUNT MOTION
SENSOR
