Start time
1. Turn dial to START TIME.
2. Using the +/- buttons, set your start time,
including AM and PM.
3. Turn dial to save changes
How Long
1. Turn dial to HOW LONG.
2. Using the +/- buttons, select watering
duration from 1 to 240 minutes
3. Turn dial to save changes.
How often
1. Turn dial to HOW OFTEN.
2. Using the +/- buttons, set your watering
frequency. You can choose to water every 6
hours, 12 hours, or from 1 to 7 days.
note:
1 is every day, 2 is every other day, etc.
3. Turn dial to save changes.
DiaL
—Rotate the dial to customize your
watering schedule
reSet
—Press to clear all programming
manUaL/CLear
—Press to water manually or to
clear programming within a specific program
+/- BUttonS
—Use these buttons to adjust time
and system setup
1 Outlet HOse Faucet timer
IMPORTANT PLEASE READ!
timer featUreS
aUto
—Timer waters according to your
customized schedule
Set CLoCK
—Set the time of day
Start time
—Select what time you would like
watering to start
How Long
—Determine how long to water
How often
—Choose how often you will water
off
—Turn off all watering
6:00
RESET
MANUAL
wHen expeCting freezing
temperatUreS, timerS SHoULD
Be removeD from tHe HoSe
faUCet anD StoreD inDoorS to
avoiD potentiaL freeze Damage.
fiLter trapS Dirt partiCLeS,
proLonging Life of timer.
CLean fiLter regULarLy anD
repLaCe if worn.
HOSE TAP
CONNECTION
+/-
BUTTONS
MANUAL/
CLEAR
FILTER
DIAL
RESET
QUiCK Start
inStaLLing tHe BatterieS
1. Remove the tray on the back of the timer by
sliding or pulling it out.
2. Insert two AA (1.5V) alkaline batteries
(not included) and replace the tray.
Note:
Firmly replace the battery tray to ensure water resistance
and increase battery life. You will know the battery tray is fully
inserted if it locks in place and does not pull out easily.
Used up or dead batteries must be removed from the timer and
disposed of properly. Batteries should be removed from the timer
at the end of the watering season and replaced with new ones at the
beginning of the next watering season. Replace batteries when low
battery icon appears on display.
programming tHe timer
Set CLoCK
1. Turn dial to SET CLOCK.
2. Using the +/- buttons, set the time of day,
including AM and PM.
3. Turn dial to save changes.
AM
AM
MINUTES
DAYS
OUTLET
AM
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit
®
.
Printed piece must meet
designated specifications
on this form.
© 2014 Orbit Inc.
This work is the property
of Orbit
®
, and cannot be
used, reproduced or
distributed in any way
without their express
permission.
Dieline
PMS
0000
Fold
PMS
0000
Product
Coverage
PMS
0000
Dims./
Callout
PMS
0000
∙
∙
∙
∙
Orbit
®
1.801.299.5555
orbitonline.com
Glue
Folded
Flat
Additional Information
PrInterS Are
requIreD tO MAtCh
All SPeCIFIeD
PMS COlOrS.
K
DATe: 02/09/2014
DesIgner: JC MArKeTIng: AY
sOfTwAre: Adobe Indesign Cs6
ArTwOrK №: 62061-24e rA
l:
W:
h:
000.000"
W:
h:
3.0"
3.0"
12.0"
6.0"
