Tools
•
Flat screw driver
•
Phillips head screw driver
•
10mm Ring spanner or 10mm Socket
•
Plastic Ruler or something similar to protect the trim
•
Container to hold screws and loose items
Installation
The first procedure is to remove the internal door cover.
Instructions below may refer to the “latch end” or the “hinge end”.
This means that if you look at the driver’s door from the inside, the Right side is the “latch
end”, and the Left side is the “hinge end”.
1. Lower door window all the way.
2. Remove 4 screws at base of the door.
INSTRUCTIONS TO INSTALL THE
ORA XL MIRROR
TO THE TOYOTA LANDCRUISER 100 SERIES
LATCH
END
HINGE
END
IMPORTANT: DO NOT ALTER THE PRE-SET ANGLE OF THE MIRROR
UNTIL YOU HAVE INSTALLED IT. SHIFTING IT OUT OF ITS DEFAULT
POSITION COULD DAMAGE PARTS.
1
More information https://www.caravansplus.com.au
