![background image](http://html1.mh-extra.com/html/ops-core/nvg-snap-shields/nvg-snap-shields_operators-manual_1640634001.webp)
For use with AN/PVS-15 (M953)
Night Vision Binoculars only.
© OPS-CORE 2016
NVG
SNAP SHIELDS
OPERATOR’S MANUAL
UM-1021 REV. A
CLEANING AND CARE
1.
Spot-clean with a mild detergent and water.
2.
Visually check the entire Snap Shield for signs of wear or breakage.
3.
Clean dust and dirt by using air pressure.
4.
Check that the snap mechanism works properly.
NOTE: IF ANY DEFECTS ARE FOUND, THE DAMAGED COMPONENTS SHOULD BE
REPLACED BEFORE USE.
MAINTENANCE