Searching for Your Code
If your TV or VCR does not respond to the SO EASY after trying all
the codes listed for your brand, try searching for your code:
Turn on your TV (or VCR).
Press the
TV
(or VCR) key on the SO EASY .
Then, press and hold the
MAGIC
key until the
light blinks twice (the light will blink once
then twice).
Next, press the
Programme-
key three times.
Alternate between
TV
and
POWER
until your
Television turns off (or between VCR and
POWER until your Video turns off).You may
have to press these keys many times, so be
patient. Remember, you must aim the SO EASY
at your device the entire time you are
searching for your code.
When your device turns off, press and release
MAGIC. Don’t forget, press
MAGIC
as soon as
your device turns off.
The SO EASY is now ready to run your device. When you want to
control your device, press the device key first.
Important notes:
- To search for the code for your Video Recorder, follow the same
instructions above, only press the VCR key during steps 2 and 4.
- If your Video’s original remote control does not have a power
key, press PLAY instead of POWER when searching for your code.
- During step 4, you may have to press these keys many times (up
to 150!), so be patient. Remember, you must aim the SO EASY at
your device the entire time you are searching for your code.
Code Blink Out
After you have used the Search Method, you can find out which
code the SO EASY is using by blinking back the code. It’s handy to
know your Television or Video code for future reference. Remember,
you can only blink back your code after the SO EASY is operating
your TV or VCR.
To blink out your code:
Press the
TV
(or VCR) key on the SO EASY.
Then, press and hold the
MAGIC
key until the
light blinks twice (the light will blink once
then twice).
Next, press
Programme-, Programme-,
Pr
.
For the first digit of your 5-digit code, press
and count the red blinks.
For the second digit, press
Volume-
and count
the red blinks.
For the third digit, press
Pr
and
count the red blinks.
For the fourth digit, press
Programme-
and
count the red blinks.
For the fifth digit, press
PLAY
and count the
red blinks.
Now you have your 5-digit code. Write your code in the boxes
provided previously for easy future reference.
Important notes:
- To blink out the code for your Video Recorder, follow the same
instructions above, only press the VCR key during step 1.
“SO EASY”
U S E R G U I D E & C O D E B O O K
Universal Remote
R
R e t a i n F o r F u t u r e R e f e r e n c e
URC-2530
700414
ABOUT YOUR SO EASY
Features and functions
Front Page
INSTALLING THE BATTERIES
Front Page
SETTING UP THE SO EASY
Front Page
TROUBLE-SHOOTING
Searching For Your Code
Front Page
Code Blink Out
Front Page
Helpful Hints
Front Page
Consumer Help-Line
Front Page
ADVANCED OPERATION
Controlling Colour & Brightness
Back Page
Punch-Through
Back Page
SET-UP CODES
Back Page
Thank you for purchasing the ONE FOR ALL “So Easy” universal
remote control (URC-2530). Your SO EASY package contains:
The SO EASY Remote Control
THE SO EASY User Guide & Code Book
The User Guide & Code Book explains in simple steps how to set up
and operate your new universal remote control. You may need this
guide again in the future, so please be sure to keep it.
Your SO EASY needs two new “AAA/LRO3” batteries.
Your SO EASY is designed to let you use one remote to operate your
Television and Video Recorder. The illustration below and the chart
on the next page describe the features and functions of the SO EASY
universal remote control.
Features and Functions
Key
Function
LED
LED
The LED (Light Emitting Diode) flashes red to show
the remote is working.
MAGIC
The MAGIC key is used to set up your SO EASY and to
access special features.
Power
The Power key controls the same features as your
original remote control.
Device Keys
The TV and VCR keys select the home entertainment
device to be controlled. For example, pressing the TV
key allows the remote to control the functions of your
Television. After pressing VCR, you can operate your
Video Recorder.
Volume, Pro/-
The Volume and Programme keys control the two
most frequently used functions of your devices. They
operate just as those on your original remote control.
These keys are also used to set up your device.
Video Recorder Keys
After pressing the VCR key, the Video Recorder keys
operate the functions of your Video Recorder.
To prevent accidental recording, the Record key must
be pressed
twice.
The SO EASY needs two new AAA/LRO3 alkaline batteries.
Remove the battery cover from the back of
the SO EASY.
Match the batteries to the +/- marks inside
the battery case, then insert the batteries.
Press the battery cover back into place.
Important note:
- In order to avoid having to reprogramme your SO EASY after you
remove the batteries, you will need to insert new batteries within
15 minutes. Also, it is best that you do not use rechargeable
batteries.
To set up the SO EASY for your Television and Video Recorder:
Turn on your TV (or VCR).
Find your Television code in the Set-Up Code
section (see reverse). Codes are listed by brand
name. The most popular codes are listed first.
Press and release the
TV
(or VCR) key on the
SO EASY. Then press and hold the
MAGIC
key
until the light blinks twice (the light will blink
once then twice).
Enter your 5-digit code
according to the
chart below. The red light will blink twice.
= 1
Volume-
= 2
Pr
= 3
Programme-
= 4
Now, aim the SO EASY at your Television and
press
POWER
. If your Television switches off,
your SO EASY is ready to operate your
Television.
Important notes:
- To set up your Video Recorder, follow the same instructions
above, only press the VCR key during step 3.
- If your device does not respond, follow steps 1-5 with each code
listed for your brand. If none of the codes listed for your brand
operate your device, follow the Search Method described in the
next section. The Search Method can be used even if your brand
is not listed at all.
- Remember, to control your device after you have programmed it
with the SO EASY, you must press the device key first (TV or VCR).
- Write the codes for your TV and VCR in the boxes provided for
easy future reference.
TV Code
VCR Code
Setting Up The SO EASY
1
2
3
4
ONE FOR ALL
Acura
Admiral
Adyson
Agazi
AGB
Aiko
11132
12224 12242 23313
14232
21131
31121
14231 11132 11322
22414 11314 12131
22332 13444
MAGIC
,,
,,
,,
,,
,,
,,
,,
,,
5
Trouble-Shooting
MAGIC
1
2
3
MAGIC
5
4
MAGIC
Volume -
Rewind
Pause
Power
VCR
Programme -
Fast
Forward
Record
Stop
Pro
Play
■
■ ■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■ ■
■
TV
TV
TV
1
2
3
4
5
6
7
MAGIC
TV
Helpful Hints
Problem:
Solution:
Consumer Help-Line
If you have any questions about the operation of your new ONE
FOR ALL Universal Remote Control, you may call our consumer help-
line for assistance. Before calling, please read this manual carefully
to find the answer to your question. If you cannot find a solution in
this manual, please complete the information below on all your
equipment before calling. This way we can better serve you.
In the UK:
phone: 0800 966 194
fax: +31 53 432 9816
e-mail: [email protected]
In Ireland:
phone: 1-800 553 118
fax: +31 53 4329816
e-mail: [email protected]
In Australia:
phone: 1-800 064 472
e-mail: [email protected]
Your ONE FOR ALL model number: URC-2530
Date of purchase:
day
/
month
/
year
day/month/year
Your device:
(The first row is an example of how to complete this table)
TYPE
BRAND
MODEL NR.
REMOTE MODEL NR.
TV
Sony
KVX-2950B
RMT-V131B
MAGIC
Installing The Batteries
1
2
3
Contents
TV
VCR
MAGIC
REC
STOP
P
A
U
S
E
STOP
STOP
About Your SO EASY
Replace batteries with 2 fresh,
new AAA/LR03 alkaline batteries
Make sure you are using new
batteries and are aiming the ONE
FOR ALL at your device.
A) Try all the codes listed for your
brand. B) Try the search method.
Try the search method.
You may be using the wrong code.
Start the search method over
again to locate the proper code.
Press TV, then press MAGIC until
the light blinks twice.
Then press:
(Programme-)
(Pr)
(Programme-)
Red light does not blink
when you press a key?
The ONE FOR ALL does not
respond after pressing a
key?
The ONE FOR ALL does not
operate your device?
Your brand is not listed in
the ONE FOR ALL code
section?
The ONE FOR ALL is not
performing commands
properly?
Your TV switches to
programme 1 when you
press the power key before
switching off OR you must
press Power twice to switch
on your TV?
UK
TV
