Page
1 from
5
923292000_09_016
GENERAL
o
These devices are used indoors
(
ta 40 C
)
in
places where emergency luminaires are
needed. The luminaires
GR-290 and GR-
292 are suitable for corridors lighting and
the
GR-291 and GR-293 for open area
lighting
.
Each device must be permanently
connected to mains power supply
.
In
normal operation the battery is charging. In
case of a mains power supply failure the
device will light the illumination led
automatically in emergency mode. When
the mains power supply is restored the
device turns to normal operation.
INSTALLATION
To install the luminaire follow the installation
instructions
ο
n page 2.
Battery Charging
The
battery
charging
is
completely
controlled
.
In this case, is
achieved the
perfect battery maintenance
,
as well as
the elongation of its duration
.
When the
battery has completely charged
,
it charges
with a maintenance current.
Battery Cut-off
The device
enters this mode when the
mains power supply fails
and battery has
lost its energy
.
During this operation the
device enters the idle state
and battery
consumption is negligible, in order to be
protected from deep discharge.
Manual
Test
This test can be done by pushing the test
button. The light source and the emergency
circuit of the device is monitored. The
manual test can be conducted only if the
main power supply and the battery is
connected. During this test period all
indication LEDs are OFF.
Automatic Operational Test
This test includes all the operations that
provide the manual test and is conducted
automatically every 15 days. In order to be
performed, the mains power supply and the
battery should be connected.
Automatic Autonomous Test
The
Automatic
Autonomous
Test
is
conducted and measures the device’s back
up operation and emergency duration. The
BATTERY FAULT LED blinks during the
measurement, indicating this process to the
user. This test is conducted automatically
every six months
.
In order to be performed,
the mains power supply and the battery
should be connected and fully charged
.
If
NON MAINTAINED SELF TESTING SPOT LIGHT
EMERGENCY LUMINAIRES WITH 1 WHITE POWER LED
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
CONSTRUCTION MATERIAL
EXTERNAL DIMENSION
WEIGHT
GUARANTEE
OPERATION VOLTAGE
MAXIMUM POWER CONSUMPTION
BATTERY (Ni-MH)
CHARGE TIME
INDICATIONS - CONTROLS
BATTERY PROTECTION
MINIMUM DURATION
DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH
EMERGENCY ILLUMINATION
LIGHT SOURCE
220-240V AC / 50-60Hz
3 hours
1.5 hour
24 hours
Deep discharge and overcharge protection
IP40
4.8V/1.2Ah
270lm
160lm
1 white
power LED
o
5 to 40 C
Up to 95%
ABS/PC, PC
3 years
(1
year for the battery
)
4
35
gr.
Ø125 x 65 mm
EN 60598-1, EN 60598-2-22
, ΕΝ 55015, ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3
Charge, lamp fault, battery fault
,
TEST button
GR-29
0
GR-291
GR-292
GR-293
3.7W / 4.1 VA
TECHNICAL CHARACTERISTICS
(for LED MODULE specifications see page 4)
Thank you for your trust in our products
Olympia Electronics - European manufacturer
