Congratulations on your purchase of the Olhausen
Games home entertainment table. We want to ensure
that you are completely satisfi ed with your purchase.
So, please feel free to contact either your dealer or
Olhausen Games for any assistance in the assembly
of your new product or for any other information you
may want or need.
Air Hockey
Assembly Instructions
OG Euro
Tools Needed for Assembly:
• Wrenches
• Philips Head Screw Driver
• Level
Assembly Procedure
DUE TO THE WEIGHT AND SIZE OF THE TABLE, IT IS RECOMMENDED THAT
(2) PEOPLE ASSEMBLE THE TABLE TOGETHER.
Step 1: Content Removal
• Carefully lift the OG Euro Series cabinet out of the box and lay it on its top, placing it on a clean and
smooth surface to avoid scratching the fi nish.
• Remove the legs from the box and locate the accessory package.
Step 2: Leg Assembly
• Attach the curved leg to the (1) inside steel angle iron using the (2) outside holes on the playfi eld
frame sides. Attach the legs using (1) bolt, (2) washers and (1) nut for each of the (4) holes on
each leg.
* Note: Do not tighten the leg bolts yet!
• Take (2) leg support braces and connect (1) curved leg assembly to the steel angle iron that supports
the playfi eld.
• Tighten all the leg bolts and support braces to complete the fi rst leg assembly.
• Repear the above process to complete the second leg assembly.
Step 3: Puck Housing
• Attach the puck housing to the under side of the steel angle iron frame using (2) bolts and (2) washers
on each puck housing.
• Attach the puck housing brackets to the second steel angle iron playfi eld support with (1) bolt, (2)
washers and (1) nut for each brace.
Content Quantity
Cabinet
1
Curved Leg Assembly
2
Leg Support Brace
4
Puck Housing
2
Hardware Package
1
Accessory Package
1
Be sure to verify that all of the items listed above are included in the box before starting assembly
OG 110114 P1
R
(continued on page 2)
